Kimia Shop
FAEN

16 x EDSFF E3.S (NVMe RAID) - Dual Controller

Base model

Dell option (no published part number)

Internal storage configuration: 16 x EDSFF E3.S (NVMe RAID) - Dual Controller

Verified in 1 active model(s): Dell PowerEdge R760

Description

Base with NVMe cage

A chassis whose front bays are connected to PCIe lanes through a dedicated NVMe backplane and accept NVMe SSDs directly (Direct) or through an NVMe-capable RAID controller (the allowed controller type depends on the vendor and server model).

NVMe has the lowest latency and highest bandwidth of the storage interfaces and suits high-transaction databases and software-defined storage.

Removing the SAS/SATA layer and talking directly to the processor greatly increases IOPS and reduces latency.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

SFF bays
0
LFF bays
0
EDSFF bays
16
SAS/SATA bays
0
NVMe bays
0

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

16 x EDSFF E3.S (NVMe RAID) - Dual ControllerPERC H965i

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: 16 x EDSFF E3.S (NVMe RAID) - Dual Controller requires PERC H965i. Per Dell's cable-routing table this dual-controller configuration needs two PERC H965i controllers.

Active models in which this part is listed

Dell PowerEdge R760

step «Chassis / storage configuration»Add to this model's configuration

Related rules (2)

  • RequirementThis part is the condition of the rule

    Per Dell's cable-routing table this dual-controller configuration needs two PERC H965i controllers.

    Parts on the other side: PERC H965i

    Source: dell-r760-ism — page 199
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 199View documentSearch this document
    Table 138. 16 x EDSFF E3.S NVMe with dual fPERC (H965i)
  • IncompatibilityThe rule applies only when this part is selected

    Riser configuration 8 supports the PERC Adapter only, while this storage configuration's cable tables use front PERCs (fPERC) only.

    Parts on the other side: R1B+R2A

    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    Table 14. PCIe Riser Configurations Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
    Source: dell-r760-tg — page 35
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 35View documentSearch this document
    8 R1B+R2A 1 PERC Adapter No

Verification and sources

Verified against this option's row in Dell's official documents; Dell publishes no part number for it - the orderable SKU and price come from a Dell quote.

Document row: dell-r760-tg — page 23
Dell PowerEdge R760 Technical Guide
“dell-r760-tg” — page 23View documentSearch this document
16 x EDSFF E3.S (NVMe RAID) - Dual Controller

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.