Kimia Shop

4XB7B09970

SSD

ThinkSystem 2.5" VA 3.84TB Read Intensive SATA 6Gb HS SSD SED

Field upgrade: order by part number 4XB7B09970; in a factory (CTO) order: feature code CBVB.

Verified in 1 active model(s): Lenovo ThinkSystem SR650 V3

Description

Read Intensive class SSD

A Read Intensive class SSD is designed for workloads that are mostly reads and has lower write endurance (DWPD) than the other classes.

For boot, web servers, CDN, data analytics and read-mostly databases it provides SSD performance at the lowest cost.

Much better IOPS and latency than HDD at a lower cost than high-endurance SSDs.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Capacity
3840
Interface
SATA
Form factor
SFF
Endurance
RI
Media
SSD
Feature code (CTO)
CBVB
Source: lp1601 — page 102
Lenovo ThinkSystem SR650 V3 Server
“lp1601” — page 102View documentSearch this document
4XB7B09970 CBVB ThinkSystem 2.5" VA 3.84TB Read Intensive SATA 6Gb HS SSD SED - Support 40

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

4XB7B09970CES1

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: CES1 requires 4XB7B09970. گزینه‌ی ⁦Encryption Enablement⁩ (⁦CES1⁩) به درایو ⁦SED⁩ نیاز دارد. (⁦FA⁩)

Active models in which this part is listed

Lenovo ThinkSystem SR650 V3

step «Drives»Maximum quantity: 40Add to this model's configuration

Related rules (3)

  • Maximum quantityThe rule limits this part

    تعداد درایوهای ⁦2.5⁩ اینچی بیشتر از جایگاه‌های ⁦2.5⁩ اینچی پشت‌پنل‌های انتخاب‌شده است. (⁦FA⁩)

    Source: lp1601 — page 36
    Lenovo ThinkSystem SR650 V3 Server
    “lp1601” — page 36View documentSearch this document
    The SR650 V3 has three drive bay zones and supports up to 20x 3.5-inch or 40x 2.5-inch hot-swap drive bays or a combination of drive bays, depending on the selected chassis and backplane configuration.
  • Maximum quantityThe rule limits this part

    More 2.5-inch SAS/SATA drives than SAS/SATA or AnyBay bays on the selected backplanes (NVMe-only backplanes such as BH8D, BS7Y, BDY7, BS81 and BQZM do not accept SAS/SATA drives).

    Source: lp1601 — page 36
    Lenovo ThinkSystem SR650 V3 Server
    “lp1601” — page 36View documentSearch this document
    The SR650 V3 has three drive bay zones and supports up to 20x 3.5-inch or 40x 2.5-inch hot-swap drive bays or a combination of drive bays, depending on the selected chassis and backplane configuration.
    Source: lp1601 — page 13
    Lenovo ThinkSystem SR650 V3 Server
    “lp1601” — page 13View documentSearch this document
    Combinations of SAS/SATA, NVMe, or AnyBay (supporting SAS, SATA or NVMe) are available
  • RequirementThis part can satisfy the requirement of the rule

    گزینه‌ی ⁦Encryption Enablement⁩ (⁦CES1⁩) به درایو ⁦SED⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: CES1

    Source: lp1601 — page 94
    Lenovo ThinkSystem SR650 V3 Server
    “lp1601” — page 94View documentSearch this document
    By selecting this feature code, the following requirements will be enabled in the configurator:
    Source: lp1601 — page 94
    Lenovo ThinkSystem SR650 V3 Server
    “lp1601” — page 94View documentSearch this document
    SED drives will be required

Verification and sources

PartSurfer status: No PartSurfer for this vendor; verified from its official document row

Document row: lp1601 — page 102
Lenovo ThinkSystem SR650 V3 Server
“lp1601” — page 102View documentSearch this document
4XB7B09970 CBVB ThinkSystem 2.5" VA 3.84TB Read Intensive SATA 6Gb HS SSD SED - Support 40

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.