Kimia Shop
FAEN

728551-B21

Base model

HP ProLiant DL580 Gen8 Configure-to-order Server

Verified in 1 active model(s): HPE ProLiant DL580 Gen8

Description

Base with SFF cage (2.5-inch drives)

A chassis with SFF (Small Form Factor) front bays that accepts 2.5-inch HDDs, SSDs and, with a suitable backplane, NVMe drives.

SFF provides more drive density in the same chassis height and is better suited to IOPS-sensitive workloads.

It allows arrays with more drives, higher random performance and a mix of SSD and HDD.

This text is the general explanation of this category of part (not a claim about one specific model).

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

728551-B21758836-B21698537-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦728551-B21⁩ requires ⁦758836-B21⁩. برای کنترلر ⁦P830i⁩ یک ⁦Flash Backed Write Cache⁩ (⁦FBWC⁩) لازم است و باید جداگانه انتخاب شود. (⁦FA⁩)
  • Requires: ⁦728551-B21⁩ requires ⁦698537-B21⁩. برای کنترلر ⁦P830i⁩ یک ⁦Flash Backed Write Cache⁩ (⁦FBWC⁩) لازم است و باید جداگانه انتخاب شود. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL580 Gen8

step «Base configuration (CTO server)»Add to this model's configuration

Related rules (1)

  • RequirementA general rule that covers this part through its attributes

    برای کنترلر ⁦P830i⁩ یک ⁦Flash Backed Write Cache⁩ (⁦FBWC⁩) لازم است و باید جداگانه انتخاب شود. (⁦FA⁩)

    Source: c04200246 — page 21
    HPE ProLiant DL580 Gen8
    “HPE ProLiant DL580 Gen8 QuickSpecs” — c04200246 · Version 23 — page 21View documentVendor siteSearch this document
    NOTE: One Flash Backed Write Cache is required for P830i SAS Controller
    Source: c04200246 — page 18
    HPE ProLiant DL580 Gen8
    “HPE ProLiant DL580 Gen8 QuickSpecs” — c04200246 · Version 23 — page 18View documentVendor siteSearch this document
    NOTE: FBWC is required and should be selected separately when ordering

Official notes (verbatim QuickSpecs text)

  • FBWC is required and should be selected separately when ordering (5) Hot-plug SAS/SATA SFF SSD or HDD Bays (Lower) (9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots) (8) USB 2.0 ports (2 front, 4 rear, 2 internal) (2) video ports (1 front, 1 rear) (1) microSD card slot (1) Trusted Platform Module (TPM) connector 4 Hot Plug Fans (eight rotors with N+1 redundancy), front accessible BIOS Legacy mode(default) or Unified Extensible Firmware Interface (UEFI) mode (Optional) HPE Integrated Lights-Out 4 (iLO4) standard management HPE iLO4 Embedded Remote Support Technology HPE Insight Control Server Provisioning HPE Insight Online HPE Active Health System System Insight Display Rack rails and cable management arm
  • PCIe slot availability is dependent on the number of processors installed. Please refer to the "Expansion slots" section for more details.
  • A minimum of two processors are required. The system may have three or four processors installed.
  • A minimum of two memory cartridges are required (one per processor).
  • A minimum of two memory DIMMs are required per cartridge (minimum of four DIMMs per server).
  • A minimum of two power supplies are required.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL580 GEN8 CONFIGURE-TO-ORDER SERVER

Document row: c04200246 — page 18
HPE ProLiant DL580 Gen8
“HPE ProLiant DL580 Gen8 QuickSpecs” — c04200246 · Version 23 — page 18View documentVendor siteSearch this document
HP ProLiant DL580 Gen8 Configure-to-order Server 728551-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.