Kimia Shop
FAEN

870548-B21

Riser

HPE DL Gen10 x8/x16/x8 Riser Kit

HPE DL Gen10 x8/x16/x8 Riser Kit N O N x8 x16 x8 - -

Source: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
870548-B21 HPE DL Gen10 x8/x16/x8 Riser Kit N O N x8 x16 x8 - -

Verified in 1 active model(s): HPE ProLiant DL380 Gen10

Description

Secondary riser

The secondary riser provides extra PCIe slots, usually connected to the second processor.

It is needed to install more cards or double-wide GPUs on the second side of the chassis.

The number of installable expansion cards increases.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Slots
3
Lanes
x8/x16/x8

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

870548-B21P02526-B21P02524-B21P02521-B21826685-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦870548-B21⁩ requires ⁦P02526-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦870548-B21⁩ requires ⁦P02524-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦870548-B21⁩ requires ⁦P02521-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Incompatible: ⁦826685-B21⁩ and ⁦870548-B21⁩ are incompatible. جعبه‌ی ⁦3LFF⁩ عقب فضای رایزر ثانویه و سوم را اشغال می‌کند. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10

step «Expansion (risers and HBAs)»Add to this model's configuration

Related rules (4)

  • RequirementThis part is the condition of the rule

    رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)

    Source: a00008180enw — page 53
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 53View documentVendor siteSearch this document
    For a Secondary/Tertiary riser, the second processor is required.
    Source: a00008180enw — page 12
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 12View documentVendor siteSearch this document
    The Secondary Riser requires Processor 2 to be populated
  • Maximum quantityThe rule limits this part

    Only one riser in the secondary position.

    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    Slot 1 (Top slot) and 2 (Middle slot) available in Secondary riser location.
    Source: a00008180enw — page 55
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
    Riser supporting up to 8 NVMe drives in Secondary riser location;
  • Maximum quantityThe rule limits this part

    The 2SFF riser kits (⁦826688-B21⁩, ⁦P57772-B21⁩) install in the primary or secondary riser position: together with primary/secondary risers ≤ 2.

    Source: a00008180enw — page 55
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
    Premium bay supporting SFF SAS/SATA; can be configured in Primary or Secondary riser location
    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    It can be installed into either the Primary Riser location, the Secondary Riser location, or both if Qty=2 is ordered.
  • IncompatibilityA general rule that covers this part through its attributes

    جعبه‌ی ⁦3LFF⁩ عقب فضای رایزر ثانویه و سوم را اشغال می‌کند. (⁦FA⁩)

    Parts on the other side: 826685-B21

    Source: a00008180enw — page 4
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 4View documentVendor siteSearch this document
    The 3 LFF rear drive box will consume space for the secondary and tertiary riser.

Official notes (verbatim QuickSpecs text)

  • Slot 1 (Top slot) and 2 (Middle slot) and 3 (Bottom slot) available in Secondary riser location.
  • No M.2 support on this riser.
  • Supports Full Height, Half- length cards, Full Height, Full-length cards and Full Height, Half- length cards.
  • Bus width x8, x16, x8, Connector Width x8, x16, x8.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE DL GEN10 X8/X16/X8 RISER KIT

Document row: a00008180enw — page 54
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
HPE DL Gen10 x8/x16/x8 Riser Kit 870548-B21
Document row: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
870548-B21 HPE DL Gen10 x8/x16/x8 Riser Kit N O N x8 x16 x8 - -

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.