Kimia Shop
FAEN

871674-B21

Riser

HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit

HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit O N N x16 x16 0 - -

Source: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
871674-B21 HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit O N N x16 x16 0 - -

Verified in 1 active model(s): HPE ProLiant DL380 Gen10

Description

Primary riser

The primary riser provides the PCIe slots connected to the first processor.

The first expansion cards, such as a PCIe controller and a network card, are installed on this riser.

The slots are available without needing the second processor.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Slots
10
Lanes
x16/x16

Active models in which this part is listed

HPE ProLiant DL380 Gen10

step «Expansion (risers and HBAs)»Only when ordering CTO (factory)Add to this model's configuration

Related rules (2)

  • Maximum quantityThe rule limits this part

    Only one riser in the primary position (each replaces the default primary riser).

    Source: a00008180enw — page 53
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 53View documentVendor siteSearch this document
    Slot 1 (Top slot) and 2 (Middle slot) available in Primary riser location Replaces the default Primary riser
    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    Riser supporting up to 8 NVMe drives in Primary location.
  • Maximum quantityThe rule limits this part

    The 2SFF riser kits (⁦826688-B21⁩, ⁦P57772-B21⁩) install in the primary or secondary riser position: together with primary/secondary risers ≤ 2.

    Source: a00008180enw — page 55
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
    Premium bay supporting SFF SAS/SATA; can be configured in Primary or Secondary riser location
    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    It can be installed into either the Primary Riser location, the Secondary Riser location, or both if Qty=2 is ordered.

Official notes (verbatim QuickSpecs text)

  • Slot 1 (Top slot) and 2 (Middle slot) available in Primary riser location
  • Replaces the default Primary riser
  • Max Qty=1 Double-wide Accelerator/GPU can be populated
  • Supports Full Height and Full length cards.
  • Bus width x16, x16, Connector Width x16, x16.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT SPECIAL RISER CARDS

Document row: a00008180enw — page 53
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 53View documentVendor siteSearch this document
HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit 871674-B21
Document row: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
871674-B21 HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit O N N x16 x16 0 - -

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.