Kimia Shop
FAEN

873732-B21

Riser

HPE DL38X Gen10 4-port 8 NVMe Secondary Slim SAS Riser

HPE DL38X Gen10 4-port 8 NVMe Secondary SlimSAS Riser N O N 0 0 0 4 8

Source: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
873732-B21 HPE DL38X Gen10 4-port 8 NVMe Secondary SlimSAS Riser N O N 0 0 0 4 8

Verified in 1 active model(s): HPE ProLiant DL380 Gen10

Description

Secondary riser

The secondary riser provides extra PCIe slots, usually connected to the second processor.

It is needed to install more cards or double-wide GPUs on the second side of the chassis.

The number of installable expansion cards increases.

This text is the general explanation of this category of part (not a claim about one specific model).

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

873732-B21826689-B21P22274-B21P51460-B21P50225-B21P02526-B21P02524-B21P02521-B21826685-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦826689-B21⁩ requires ⁦873732-B21⁩. کیت ⁦8NVMe⁩ (⁦826689-B21⁩) رایزر ⁦NVMe⁩ اصلی ⁦867807-B21⁩ (یا در حالت دو پردازنده‌ای رایزر ثانویه ⁦873732-B21⁩) را لازم دارد. (⁦FA⁩)
  • Requires: ⁦P22274-B21⁩ requires ⁦873732-B21⁩. درایو ⁦NVMe⁩ به کیت رایزر دارای ⁦NVMe⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P51460-B21⁩ requires ⁦873732-B21⁩. درایو ⁦NVMe⁩ به کیت رایزر دارای ⁦NVMe⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P50225-B21⁩ requires ⁦873732-B21⁩. درایو ⁦NVMe⁩ به کیت رایزر دارای ⁦NVMe⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦873732-B21⁩ requires ⁦P02526-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦873732-B21⁩ requires ⁦P02524-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦873732-B21⁩ requires ⁦P02521-B21⁩. رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Incompatible: ⁦826685-B21⁩ and ⁦873732-B21⁩ are incompatible. جعبه‌ی ⁦3LFF⁩ عقب فضای رایزر ثانویه و سوم را اشغال می‌کند. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10

step «Expansion (risers and HBAs)»Add to this model's configuration

Related rules (7)

  • RequirementThis part can satisfy the requirement of the rule

    درایو ⁦NVMe⁩ به کیت رایزر دارای ⁦NVMe⁩ نیاز دارد. (⁦FA⁩)

    Source: a00008180enw — page 49
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 49View documentVendor siteSearch this document
    A NVME (826689-B21 or 873781-B21) or Premium (826690-B21) drive cage is required to support these drives in conjunction with an NVMe riser kit.
  • RequirementThis part can satisfy the requirement of the rule

    کیت ⁦8NVMe⁩ (⁦826689-B21⁩) رایزر ⁦NVMe⁩ اصلی ⁦867807-B21⁩ (یا در حالت دو پردازنده‌ای رایزر ثانویه ⁦873732-B21⁩) را لازم دارد. (⁦FA⁩)

    Parts on the other side: 826689-B21

    Source: a00008180enw — page 51
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 51View documentVendor siteSearch this document
    This will require the HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21).
    Source: a00008180enw — page 42
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 42View documentVendor siteSearch this document
    If configuration is 2x CPU + HPE DL38X NVMe 8 Solid State Drive Express Bay Enablement Kit. Then can only select 4 Port Slimline Secondary riser (873732-B21).
  • RequirementThis part is the condition of the rule

    رایزر ثانویه/سوم به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)

    Source: a00008180enw — page 53
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 53View documentVendor siteSearch this document
    For a Secondary/Tertiary riser, the second processor is required.
    Source: a00008180enw — page 12
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 12View documentVendor siteSearch this document
    The Secondary Riser requires Processor 2 to be populated
  • Minimum quantityThe rule applies only when this part is selected

    با بیش از ۳ ⁦GPU⁩ مدل ⁦A2⁩ و انتخاب رایزر ⁦Slimline⁩ (⁦873732-B21/867806-B21⁩) یا رایزر سوم، یک ⁦P38517-B21⁩ لازم است. (⁦FA⁩)

    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    Qty1 of Pri/Sec Rsr w/o Retainer (P38515-B21) and Tert Riser w/o Retainer (P38517-B21) must be selected if Secondary 4Port Slimline Riser (873732-B21) or 1Port Slimline Riser (867806-B21) or Tertiary riser is selected.
  • Maximum quantityThe rule limits this part

    Only one riser in the secondary position.

    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    Slot 1 (Top slot) and 2 (Middle slot) available in Secondary riser location.
    Source: a00008180enw — page 55
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
    Riser supporting up to 8 NVMe drives in Secondary riser location;
  • Maximum quantityThe rule limits this part

    The 2SFF riser kits (⁦826688-B21⁩, ⁦P57772-B21⁩) install in the primary or secondary riser position: together with primary/secondary risers ≤ 2.

    Source: a00008180enw — page 55
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
    Premium bay supporting SFF SAS/SATA; can be configured in Primary or Secondary riser location
    Source: a00008180enw — page 54
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View documentVendor siteSearch this document
    It can be installed into either the Primary Riser location, the Secondary Riser location, or both if Qty=2 is ordered.
  • IncompatibilityA general rule that covers this part through its attributes

    جعبه‌ی ⁦3LFF⁩ عقب فضای رایزر ثانویه و سوم را اشغال می‌کند. (⁦FA⁩)

    Parts on the other side: 826685-B21

    Source: a00008180enw — page 4
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 4View documentVendor siteSearch this document
    The 3 LFF rear drive box will consume space for the secondary and tertiary riser.

Official notes (verbatim QuickSpecs text)

  • Riser supporting up to 8 NVMe drives in Secondary riser location; All PCIe lanes dedicated to NVMe; no additional slots available for expansion via stand-up cards in the Secondary riser location.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE DL38X GEN10 4-PORT 8 NVME SECONDARY SLIM SAS RISER

Document row: a00008180enw — page 55
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
HPE DL38X Gen10 4-port 8 NVMe Secondary Slim SAS Riser 873732-B21
Document row: a00008180enw — page 56
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View documentVendor siteSearch this document
873732-B21 HPE DL38X Gen10 4-port 8 NVMe Secondary SlimSAS Riser N O N 0 0 0 4 8

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.