Kimia Shop
FAEN

878014-B21

NVMe

HPE 375GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

Verified in 2 active model(s): HPE ProLiant DL380 Gen9, HPE ProLiant DL580 Gen9

Description

NVMe SSD

An NVMe SSD is a drive that uses the NVMe protocol over PCIe lanes and has much lower latency and protocol overhead than SAS and SATA.

It is chosen for high-transaction databases, AI, real-time analytics and storage caches that need the highest IOPS.

Several times the bandwidth and IOPS of a SAS/SATA SSD with much lower latency.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Capacity
375
Interface
NVMe
Form factor
SFF
Endurance
WI
Media
SSD

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

878014-B21810393-B21788359-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦878014-B21⁩ requires ⁦810393-B21⁩. درایوهای ⁦NVMe⁩ به شاسی ⁦NVMe⁩ (⁦810393-B21⁩) نیاز دارند (کیت ⁦774741-B21⁩ در این کاتالوگ موجود نیست). (⁦FA⁩)
  • Requires: ⁦878014-B21⁩ requires ⁦788359-B21⁩. To support NVMe PCIe SSDs you need to select the SSD Express Bay Kit (⁦788359-B21⁩).

Active models in which this part is listed

HPE ProLiant DL380 Gen9

step «Drives»Add to this model's configuration

Related rules (1)

  • RequirementA general rule that covers this part through its attributes

    درایوهای ⁦NVMe⁩ به شاسی ⁦NVMe⁩ (⁦810393-B21⁩) نیاز دارند (کیت ⁦774741-B21⁩ در این کاتالوگ موجود نیست). (⁦FA⁩)

    Parts on the other side: 810393-B21

    Source: c04346247 — page 28
    HPE ProLiant DL380 Gen9 Server
    “HPE ProLiant DL380 Gen9 Server QuickSpecs” — c04346247 · Version 47 — page 28View documentVendor siteSearch this document
    The NVMe CTO chassis (810393-B21) or the NVMe Express Bay Enablement kit (774741-B21) are required to support these drives.

HPE ProLiant DL580 Gen9

step «Drives»Add to this model's configuration

Related rules (1)

  • RequirementA general rule that covers this part through its attributes

    To support NVMe PCIe SSDs you need to select the SSD Express Bay Kit (⁦788359-B21⁩).

    Parts on the other side: 788359-B21

    Source: c04601208 — page 26
    HPE ProLiant DL580 Generation9 (Gen9)
    “HPE ProLiant DL580 Generation9 (Gen9) QuickSpecs” — c04601208 · Version 26 — page 26View documentVendor siteSearch this document
    NOTE: To support NVMe PCIe SSDs you need to select the SSD Express Bay Kit (788359-B21), maximum of 5 drives supported.

Official notes (verbatim QuickSpecs text)

  • With NVMe support only 1xDouble Wide Graphics card is supported.
  • To support NVMe PCIe SSDs you need to select the SSD Express Bay Kit (788359-B21), maximum of 5 drives supported.
  • Hewlett Packard Enterprise has qualified the NVMe drive portfolio using the Operating System inbox drivers. For full details please see the Solid State Drive QuickSpecs: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154378.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE 375GB NVME GEN3 HIGH PERFORMANCE LOW LATENCY WRITE INTENSIVE SFF SCN U.2 P4800X SSD

Document row: c04346247 — page 28
HPE ProLiant DL380 Gen9 Server
“HPE ProLiant DL380 Gen9 Server QuickSpecs” — c04346247 · Version 47 — page 28View documentVendor siteSearch this document
HPE 375GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD 878014-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.