Kimia Shop
FAEN

P08449-B21

OCP network adapter

Intel® I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE

Verified in 2 active model(s): HPE ProLiant DL380 Gen11, HPE ProLiant DL380 Gen10 Plus

Description

OCP 3.0 network adapter

OCP NIC 3.0 is an open standard network adapter form factor, installed in the server's dedicated OCP slot, usually accessible from the back of the chassis.

In newer servers it has replaced FlexibleLOM and provides high-speed network ports without taking a PCIe slot.

A wide variety of cards from different manufacturers and easier service from the back of the chassis.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Port count
4
Port speed
1
Type
OCP
Connector
BASE-T

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P08449-B21P26966-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦P26966-B21⁩ requires ⁦P08449-B21⁩. ⁦DSC-25⁩ با ⁦Legacy FIO Mode⁩ روی شاسی ⁦NC⁩ پشتیبانی نمی‌شود؛ باید آداپتور شبکه‌ی دیگری (بدون این محدودیت) هم انتخاب شود. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Networking»Add to this model's configuration

Related rules (1)

  • Maximum quantityThe rule limits this part

    This server has two OCP slots (OCP 1 and OCP 2): OCP NICs + OCP storage controllers (OROC) ≤ 2.

    Source: a50004307enw — page 59
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View documentVendor siteSearch this document
    DL380 Gen11 OCP 1 and OCP 2 Priority Support Matrix
    Source: a50004307enw — page 59
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View documentVendor siteSearch this document
    OCP Slot 1 OCP Storage 1 OCP NIC 2 OCP NICs 1 OCP Storage 2 OCP Storage

HPE ProLiant DL380 Gen10 Plus

step «Networking»Add to this model's configuration

Related rules (1)

  • RequirementThis part can satisfy the requirement of the rule

    ⁦DSC-25⁩ با ⁦Legacy FIO Mode⁩ روی شاسی ⁦NC⁩ پشتیبانی نمی‌شود؛ باید آداپتور شبکه‌ی دیگری (بدون این محدودیت) هم انتخاب شود. (⁦FA⁩)

    Parts on the other side: P26966-B21

    Source: a50002553enw — page 51
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 51View documentVendor siteSearch this document
    To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: INTEL I350-T4 ETHERNET 1GB 4-PORT BASE-T OCP3 ADAPTER FOR HPE

Document row: a50004307enw — page 57
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 57View documentVendor siteSearch this document
Intel® I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.