P14374-B21

Name: HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Riser Kit
Brand: HPE
SKU: P14374-B21

Riser

HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Riser Kit

HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Kit1 O N N x8 x16 x8 - -

Source: a00008180enw — page 56

HPE ProLiant DL380 Gen10 Server

“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View document Vendor site Search this document

P14374-B21 HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Kit1 O N N x8 x16 x8 - -

Verified in 1 active model(s): HPE ProLiant DL380 Gen10

Description

Primary riser

The primary riser provides the PCIe slots connected to the first processor.

The first expansion cards, such as a PCIe controller and a network card, are installed on this riser.

The slots are available without needing the second processor.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Slots: 3
Lanes: x16/x16/x16

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

Active models in which this part is listed

HPE ProLiant DL380 Gen10

step «Expansion (risers and HBAs)»Only when ordering CTO (factory)Add to this model's configuration

Related rules (4)

RequirementThis part is the condition of the rule
رایزر ⁦GPU⁩ اصلی ⁦P14374-B21⁩ باید همراه رایزر ⁦GPU⁩ ثانویه ⁦P14373-B21⁩ انتخاب شود. (⁦FA⁩)
Parts on the other side: P14373-B21
Source: a00008180enw — page 54
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View document Vendor site Search this document
HPE DL38X Gen10 x16/x16/x16 Secondary GPU FIO Riser Kit must also be selected and requires all slots (3) be populated.
WarningThe rule applies only when this part is selected
رایزرهای ⁦GPU⁩ کارخانه‌ای ⁦P14374-B21⁩ و ⁦P14373-B21⁩ فقط در سفارش کارخانه‌ای (⁦FIO⁩) هستند و هر سه اسلات هر رایزر باید پر شود (تا ۳ ⁦GPU⁩/شتاب‌دهنده‌ی تک‌عرض به‌ازای هر رایزر). (⁦FA⁩)
Source: a00008180enw — page 54
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View document Vendor site Search this document
This is a factory-integrated only (FIO) option. All slots (3) must be populated.
Maximum quantityThe rule limits this part
Only one riser in the primary position (each replaces the default primary riser).
Source: a00008180enw — page 53
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 53View document Vendor site Search this document
Slot 1 (Top slot) and 2 (Middle slot) available in Primary riser location Replaces the default Primary riser
Source: a00008180enw — page 54
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View document Vendor site Search this document
Riser supporting up to 8 NVMe drives in Primary location.
Maximum quantityThe rule limits this part
The 2SFF riser kits (⁦826688-B21⁩, ⁦P57772-B21⁩) install in the primary or secondary riser position: together with primary/secondary risers ≤ 2.
Source: a00008180enw — page 55
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View document Vendor site Search this document
Premium bay supporting SFF SAS/SATA; can be configured in Primary or Secondary riser location
Source: a00008180enw — page 54
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View document Vendor site Search this document
It can be installed into either the Primary Riser location, the Secondary Riser location, or both if Qty=2 is ordered.

Official notes (verbatim QuickSpecs text)

Slot 1 (Top slot) and 2 (Middle Slot) and 3 (Bottom slot) available in Primary riser location and must be populated. Supports up to (3) full-height, half-length, single-width GPU/Accelerators (depending on model)
Replaces the default Primary riser
Bus width x8, x16, x8; Connector width x16, x16, x16
This is a factory-integrated only (FIO) option. All slots (3) must be populated.
HPE DL38X Gen10 x16/x16/x16 Secondary GPU FIO Riser Kit must also be selected and requires all slots (3) be populated.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT SERVER FAMILY SPECIAL RISER CARDS

Document row: a00008180enw — page 54

HPE ProLiant DL380 Gen10 Server

“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 54View document Vendor site Search this document

HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Riser Kit P14374-B21

Document row: a00008180enw — page 56

HPE ProLiant DL380 Gen10 Server

“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 56View document Vendor site Search this document

P14374-B21 HPE DL38X Gen10 x16/x16/x16 Primary GPU FIO Kit1 O N N x8 x16 x8 - -

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.