P26269-B21

Name: Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE
Brand: HPE
SKU: P26269-B21

OCP network adapter

Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE

BCM 57504 10/25GbE 4p SFP28 OCP3 Adptr 9 6

Source: a00073551enw — page 67

HPE ProLiant Compute DL380 Gen12

“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 67View document Vendor site Search this document

P26269-B21 BCM 57504 10/25GbE 4p SFP28 OCP3 Adptr 9 6

Verified in 4 active model(s): HPE ProLiant DL380 Gen12, HPE ProLiant DL580 Gen12, HPE ProLiant DL380 Gen11, HPE ProLiant DL380 Gen10 Plus

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE, part number P26269-B21.

Features

Ethernet adapter, 10/25Gb, 4-port, SFP28, OCP3 form factor.

Official notes

Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.

Compatibility & limits

The choice of stand-up or OCP networking card is required.

How it differs

P26269-B21 is a 4-port SFP28 OCP3 adapter, while P10106-B21 is a 2-port SFP28 OCP3 adapter.
P26269-B21 is a Broadcom BCM57504 adapter, while P42041-B21 is a Mellanox MCX631432AS-ADAI adapter.

Description

OCP 3.0 network adapter

OCP NIC 3.0 is an open standard network adapter form factor, installed in the server's dedicated OCP slot, usually accessible from the back of the chassis.

In newer servers it has replaced FlexibleLOM and provides high-speed network ports without taking a PCIe slot.

A wide variety of cards from different manufacturers and easier service from the back of the chassis.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Port count: 4
Port speed: 25
Type: OCP
Connector: SFP28

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Networking»Add to this model's configuration

Related rules (1)

WarningThe rule applies only when this part is selected
⁦DIMM⁩ ‏⁦256GB⁩ با کارت‌های ⁦OCP⁩ در سطح حرارتی ۱۰ یا ۱۱ پشتیبانی نمی‌شود؛ سطح حرارتی کارت به نوع کابل (⁦AOC/DAC⁩) بستگی دارد. (⁦FA⁩)
Source: a00073551enw — page 71
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 71View document Vendor site Search this document
256GB DIMMs cannot be configured with OCP Thermal Level 10 or 11 adapters.

HPE ProLiant DL580 Gen12

step «Networking»Add to this model's configuration

Related rules (1)

Maximum quantityThe rule limits this part
حداکثر دو اسلات ⁦OCP⁩ در عقب وجود دارد؛ آداپتور ⁦OCP⁩ و کنترلر ⁦OCP⁩ هر کدام یک اسلات می‌گیرند. (⁦FA⁩)
Source: a50009226enw — page 6
HPE ProLiant Compute DL580 Gen12
“HPE ProLiant Compute DL580 Gen12 QuickSpecs” — a50009226enw · Version 12 — page 6View document Vendor site Search this document
Up to two rear OCP slots.
Source: a50009226enw — page 10
HPE ProLiant Compute DL580 Gen12
“HPE ProLiant Compute DL580 Gen12 QuickSpecs” — a50009226enw · Version 12 — page 10View document Vendor site Search this document
MR416i-o / MR216i-o / 1 OCP B

HPE ProLiant DL380 Gen11

step «Networking»Add to this model's configuration

Related rules (1)

Maximum quantityThe rule limits this part
This server has two OCP slots (OCP 1 and OCP 2): OCP NICs + OCP storage controllers (OROC) ≤ 2.
Source: a50004307enw — page 59
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View document Vendor site Search this document
DL380 Gen11 OCP 1 and OCP 2 Priority Support Matrix
Source: a50004307enw — page 59
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View document Vendor site Search this document
OCP Slot 1 OCP Storage 1 OCP NIC 2 OCP NICs 1 OCP Storage 2 OCP Storage

HPE ProLiant DL380 Gen10 Plus

step «Networking»Add to this model's configuration

Related rules (1)

RequirementThis part can satisfy the requirement of the rule
⁦DSC-25⁩ با ⁦Legacy FIO Mode⁩ روی شاسی ⁦NC⁩ پشتیبانی نمی‌شود؛ باید آداپتور شبکه‌ی دیگری (بدون این محدودیت) هم انتخاب شود. (⁦FA⁩)
Parts on the other side: P26966-B21
Source: a50002553enw — page 51
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 51View document Vendor site Search this document
To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: BROADCOM BCM57504 ETHERNET 10/25GB 4-PORT SFP28 OCP3 ADAPTER FOR HPE

Document row: a00073551enw — page 57

HPE ProLiant Compute DL380 Gen12

“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 57View document Vendor site Search this document

Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE P26269-B21

Document row: a00073551enw — page 67

HPE ProLiant Compute DL380 Gen12

“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 67View document Vendor site Search this document

P26269-B21 BCM 57504 10/25GbE 4p SFP28 OCP3 Adptr 9 6

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.