Kimia Shop
FAEN

P38517-B21

GPU kit

HPE DL380 Gen10 Tert Riser w/o Retainer

Verified in 1 active model(s): HPE ProLiant DL380 Gen10

Description

GPU enablement kit

The GPU enablement kit includes the GPU auxiliary power cable, an air duct or retention bracket and the parts needed to install a GPU safely in the chassis.

High-power GPUs draw more power than the PCIe slot provides and need directed airflow, which is not provided without this kit.

The GPU is installed in a supported way, with enough power and cooling.

This text is the general explanation of this category of part (not a claim about one specific model).

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P38517-B21R8T26CR9H23C

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: R8T26C requires ⁦P38517-B21⁩. ⁦GPU⁩ مدل ⁦A16⁩ به رایزر بدون نگهدارنده ⁦P38515-B21⁩ و/یا ⁦P38517-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: R9H23C requires ⁦P38517-B21⁩. ⁦GPU⁩ مدل ⁦A2⁩ به رایزر بدون نگهدارنده ⁦P38515-B21⁩ و/یا ⁦P38517-B21⁩ نیاز دارد؛ برای بیش از ۳ ⁦GPU⁩ دو قطعه لازم است. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10

step «Accelerators and GPUs»Add to this model's configuration

Related rules (4)

  • RequirementThis part can satisfy the requirement of the rule

    ⁦GPU⁩ مدل ⁦A16⁩ به رایزر بدون نگهدارنده ⁦P38515-B21⁩ و/یا ⁦P38517-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: R8T26C

    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    Requires selection of HPE DL380 Gen10 Pri/Sec Rsr w/o Retainer (P38515-B21) and/or HPE DL380 Gen10 Tert Riser w/o Retainer (P38517-B21).
  • RequirementThis part can satisfy the requirement of the rule

    ⁦GPU⁩ مدل ⁦A2⁩ به رایزر بدون نگهدارنده ⁦P38515-B21⁩ و/یا ⁦P38517-B21⁩ نیاز دارد؛ برای بیش از ۳ ⁦GPU⁩ دو قطعه لازم است. (⁦FA⁩)

    Parts on the other side: R9H23C

    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    Requires selection of HPE DL380 Gen10 Pri/Sec Rsr w/o Retainer (P38515-B21) and/or HPE DL380 Gen10 Tert Riser w/o Retainer (P38517-B21).
    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    If Qty 3 or less number of this GPU is selected, then Qty 1 of Pri/Sec Rsr w/o Retainer (P38515-B21) must be selected.
  • Minimum quantityThe rule limits this part

    با بیش از ۶ ⁦GPU⁩ مدل ⁦A2⁩ یک ⁦P38517-B21⁩ لازم است. (⁦FA⁩)

    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    If more than Qty 6 of this GPU is selected, then Qty1 of Pri/Sec Rsr w/o Retainer (P38515-B21) and Tert Riser w/o Retainer (P38517-B21) must be selected.
  • Minimum quantityThe rule limits this part

    با بیش از ۳ ⁦GPU⁩ مدل ⁦A2⁩ و انتخاب رایزر ⁦Slimline⁩ (⁦873732-B21/867806-B21⁩) یا رایزر سوم، یک ⁦P38517-B21⁩ لازم است. (⁦FA⁩)

    Source: a00008180enw — page 60
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 60View documentVendor siteSearch this document
    Qty1 of Pri/Sec Rsr w/o Retainer (P38515-B21) and Tert Riser w/o Retainer (P38517-B21) must be selected if Secondary 4Port Slimline Riser (873732-B21) or 1Port Slimline Riser (867806-B21) or Tertiary riser is selected.

Official notes (verbatim QuickSpecs text)

  • This tertiary riser cage is a butterfly cage for both the secondary riser and tertiary riser. It removes the retainer clip in the secondary riser for proper fitment of certain NVIDIA GPUs, while allowing for a tertiary riser selection as well. This option should be selected if the tertiary riser is being populated with any option, including NVIDIA GPUs, and the secondary riser contains an applicable NVIDIA GPU. First select the appropriate secondary riser and tertiary riser (see “Riser Information” table for riser options); then add P38517-B21.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE DL380 GEN10 PCI TERTIARY RISER CAGE WITHOUT RETAINER CLIP

Document row: a00008180enw — page 55
HPE ProLiant DL380 Gen10 Server
“HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 55View documentVendor siteSearch this document
HPE DL380 Gen10 Tert Riser w/o Retainer P38517-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.