Kimia Shop
FAEN

P41614-B21

OCP network adapter

Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE

INT E810 10/25GbE 4p SFP28 OCP3 Adptr 10 3

Source: a00073551enw — page 67
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 67View documentVendor siteSearch this document
P41614-B21 INT E810 10/25GbE 4p SFP28 OCP3 Adptr 10 3

Verified in 3 active model(s): HPE ProLiant DL380 Gen12, HPE ProLiant DL580 Gen12, HPE ProLiant DL380 Gen11

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE, part number P41614-B21.

Why this part number

  • The choice of stand-up or OCP networking card is required; this part is an OCP3 adapter.

Features

  • 10/25Gb, 4-port, SFP28, OCP3.

Official notes

  • Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.

Compatibility & limits

  • 256GB DIMMs cannot be configured with OCP Thermal Level 10 or 11 adapters.
  • The choice of stand-up or OCP networking card is required.

How it differs

  • P41614-B21 is a 4-port adapter, whereas P10106-B21 is a 2-port adapter.

Description

OCP 3.0 network adapter

OCP NIC 3.0 is an open standard network adapter form factor, installed in the server's dedicated OCP slot, usually accessible from the back of the chassis.

In newer servers it has replaced FlexibleLOM and provides high-speed network ports without taking a PCIe slot.

A wide variety of cards from different manufacturers and easier service from the back of the chassis.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Port count
4
Port speed
25
Type
OCP
Connector
SFP28

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Networking»Add to this model's configuration

Related rules (1)

  • WarningThe rule applies only when this part is selected

    ⁦DIMM⁩ ‏⁦256GB⁩ با کارت‌های ⁦OCP⁩ در سطح حرارتی ۱۰ یا ۱۱ پشتیبانی نمی‌شود؛ سطح حرارتی کارت به نوع کابل (⁦AOC/DAC⁩) بستگی دارد. (⁦FA⁩)

    Source: a00073551enw — page 71
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 71View documentVendor siteSearch this document
    256GB DIMMs cannot be configured with OCP Thermal Level 10 or 11 adapters.

HPE ProLiant DL580 Gen12

step «Networking»Add to this model's configuration

Related rules (1)

  • Maximum quantityThe rule limits this part

    حداکثر دو اسلات ⁦OCP⁩ در عقب وجود دارد؛ آداپتور ⁦OCP⁩ و کنترلر ⁦OCP⁩ هر کدام یک اسلات می‌گیرند. (⁦FA⁩)

    Source: a50009226enw — page 6
    HPE ProLiant Compute DL580 Gen12
    “HPE ProLiant Compute DL580 Gen12 QuickSpecs” — a50009226enw · Version 12 — page 6View documentVendor siteSearch this document
    Up to two rear OCP slots.
    Source: a50009226enw — page 10
    HPE ProLiant Compute DL580 Gen12
    “HPE ProLiant Compute DL580 Gen12 QuickSpecs” — a50009226enw · Version 12 — page 10View documentVendor siteSearch this document
    MR416i-o / MR216i-o / 1 OCP B

HPE ProLiant DL380 Gen11

step «Networking»Add to this model's configuration

Related rules (1)

  • Maximum quantityThe rule limits this part

    This server has two OCP slots (OCP 1 and OCP 2): OCP NICs + OCP storage controllers (OROC) ≤ 2.

    Source: a50004307enw — page 59
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View documentVendor siteSearch this document
    DL380 Gen11 OCP 1 and OCP 2 Priority Support Matrix
    Source: a50004307enw — page 59
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 59View documentVendor siteSearch this document
    OCP Slot 1 OCP Storage 1 OCP NIC 2 OCP NICs 1 OCP Storage 2 OCP Storage

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: INTEL E810-XXVDA4 ETHERNET 10/25GB 4-PORT SFP28 OCP3 ADAPTER FOR HPE

Document row: a00073551enw — page 57
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 57View documentVendor siteSearch this document
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE P41614-B21
Document row: a00073551enw — page 67
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 67View documentVendor siteSearch this document
P41614-B21 INT E810 10/25GbE 4p SFP28 OCP3 Adptr 10 3

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.