Kimia Shop
FAEN

P47785-B21

Controller

HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller

Verified in 3 active model(s): HPE ProLiant DL380 Gen12, HPE ProLiant DL580 Gen12, HPE ProLiant DL380 Gen11

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller, part number P47785-B21.

Features

  • x16 Lanes, without Cache.

Official notes

  • After completing your Smart Chassis configuration, set the Smart Chassis quantity to 1. OCA will automatically select the required cables, which will appear under Storage Devices (Step 5) > Internal Storage Controller Cables.
  • No manual cable selection is required.

Description

Entry RAID controller (no cache)

An entry RAID controller implements simple RAID 0, 1, 10 and sometimes 5 arrays without dedicated cache memory.

For servers with simple storage needs, such as a two-drive mirror for the operating system, it costs less.

Basic data protection against drive failure at low cost and complexity.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Model
MR216i-p
Class
raid-entry
Lanes
16

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P47785-B21P51083-B21P48802-B21P48806-B21P48813-B21P48918-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦P47785-B21⁩ requires ⁦P51083-B21⁩. با دو کنترلر ⁦PCIe⁩ (نوع -⁦p⁩) یا بیشتر، انتخاب رایزر ثانویه (⁦P51083-B21⁩، ⁦P48802-B21⁩ یا ⁦P48806-B21⁩) الزامی است. (⁦FA⁩)
  • Requires: ⁦P47785-B21⁩ requires ⁦P48802-B21⁩. با دو کنترلر ⁦PCIe⁩ (نوع -⁦p⁩) یا بیشتر، انتخاب رایزر ثانویه (⁦P51083-B21⁩، ⁦P48802-B21⁩ یا ⁦P48806-B21⁩) الزامی است. (⁦FA⁩)
  • Requires: ⁦P47785-B21⁩ requires ⁦P48806-B21⁩. با دو کنترلر ⁦PCIe⁩ (نوع -⁦p⁩) یا بیشتر، انتخاب رایزر ثانویه (⁦P51083-B21⁩، ⁦P48802-B21⁩ یا ⁦P48806-B21⁩) الزامی است. (⁦FA⁩)
  • Requires: ⁦P48813-B21⁩ requires ⁦P47785-B21⁩. با قفسه ⁦8SFF U.3 x1⁩ (⁦P48813-B21⁩) همراه بسته ⁦8/16 NVMe⁩، انتخاب یکی از کنترلرهای ذخیره‌سازی داخلی (⁦MR416i-p/-o⁩، ⁦MR216i-p/-o⁩، ⁦MR408i-o⁩، ⁦SR932i-p⁩) الزامی است؛ کنترلر خارجی ⁦E208e-p⁩ (⁦804398-B21⁩) این الزام را برآورده نمی‌کند (به‌جز ⁦SR308i-o/SR308i-p⁩ که در این سند قلم سفارشی ندارند). (⁦FA⁩)
  • Requires: ⁦P47785-B21⁩ requires ⁦P48918-B21⁩. کنترلرهای ⁦Tri-Mode⁩ نیازمند کیت کابل فعال‌ساز کنترلر ذخیره‌سازی (⁦P48918-B21⁩) هستند. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Storage controllers, cables and batteries»Add to this model's configuration

Related rules (4)

  • RequirementThis part is the condition of the rule

    کنترلرهای ⁦Tri-Mode⁩ نیازمند کیت کابل فعال‌ساز کنترلر ذخیره‌سازی (⁦P48918-B21⁩) هستند. (⁦FA⁩)

    Parts on the other side: P48918-B21

    Source: a50004307enw — page 19
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 19View documentVendor siteSearch this document
    Requires HPE ProLiant Storage Controller Enablement Cable Kit (P48918-B21).
  • RequirementThis part is the condition of the rule

    با دو کنترلر ⁦PCIe⁩ (نوع -⁦p⁩) یا بیشتر، انتخاب رایزر ثانویه (⁦P51083-B21⁩، ⁦P48802-B21⁩ یا ⁦P48806-B21⁩) الزامی است. (⁦FA⁩)

    Parts on the other side: P51083-B21P48802-B21P48806-B21

    Source: a50004307enw — page 19
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 19View documentVendor siteSearch this document
    If second controller is required, you must select secondary riser.
  • WarningThe rule applies only when this part is selected

    درایوهای ⁦NVMe⁩ سری ⁦PE80xx⁩ پشتیبانی نمی‌شوند. (⁦FA⁩)

    Source: a50004307enw — page 19
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 19View documentVendor siteSearch this document
    PE80xx NVMe drives are not supported.
  • RequirementThis part can satisfy the requirement of the rule

    با قفسه ⁦8SFF U.3 x1⁩ (⁦P48813-B21⁩) همراه بسته ⁦8/16 NVMe⁩، انتخاب یکی از کنترلرهای ذخیره‌سازی داخلی (⁦MR416i-p/-o⁩، ⁦MR216i-p/-o⁩، ⁦MR408i-o⁩، ⁦SR932i-p⁩) الزامی است؛ کنترلر خارجی ⁦E208e-p⁩ (⁦804398-B21⁩) این الزام را برآورده نمی‌کند (به‌جز ⁦SR308i-o/SR308i-p⁩ که در این سند قلم سفارشی ندارند). (⁦FA⁩)

    Parts on the other side: P48813-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If 8SFF U.3 x1 Cage is selected along with 8 OR 16 NVMe bundle then controller must be selected except SR308i-o/SR308i-p.
    Source: a50004307enw — page 45
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 45View documentVendor siteSearch this document
    If 8SFF U.3 x1 drive cage (P48813-B21) is selected along with 8 OR 16 NVMe bundle, then controller must be selected.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE MR216I-P GEN11 X16 LANES WITHOUT CACHE PCI SPDM PLUG-IN STORAGE CONTROLLER

Document row: a00073551enw — page 45
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 45View documentVendor siteSearch this document
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller P47785-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.