Kimia Shop
FAEN

P69548-B21

Storage kit

HPE ProLiant DL380 Gen11 8NVMe 1P FIO Bundle Kit

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P69548-B21P56073-B21P48820-B21P52535-B21P48825-B21P48814-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P56073-B21⁩ and ⁦P69548-B21⁩ are incompatible. بسته ⁦8NVMe 1P⁩ و کیت کابل ⁦Primary 3x16⁩ (⁦P56073-B21⁩) همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Requires: ⁦P69548-B21⁩ requires ⁦P48820-B21⁩. بسته‌های ⁦NVMe/EDSFF⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)
  • Requires: ⁦P69548-B21⁩ requires ⁦P52535-B21⁩. بسته‌های ⁦NVMe/EDSFF⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)
  • Requires: ⁦P69548-B21⁩ requires ⁦P48825-B21⁩. بسته‌های ⁦NVMe⁩ نیازمند یک کیت کابل ⁦8SFF NVMe CPU1/2⁩ (⁦P48825-B21⁩) هستند. (⁦FA⁩)
  • Requires: ⁦P69548-B21⁩ requires ⁦P48814-B21⁩. بسته ⁦8NVMe 1P⁩ نیازمند یک قفسه ⁦8SFF U.3 x4⁩ (⁦P48814-B21⁩) است. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Drive cages and bays»Only when ordering CTO (factory)Add to this model's configuration

Only with these base models: P52534-B21

Related rules (6)

  • RequirementThis part is the condition of the rule

    بسته‌های ⁦NVMe/EDSFF⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If this NVMe Bundle/ EDSFF Bundle is selected then Qty 1 of High-Performance Fan Kit must be selected and defaulted.
    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If this NVMe Bundle/ EDSFF Bundle is selected then Qty 1 of High-Performance Fan Kit must be selected.
  • RequirementThis part is the condition of the rule

    بسته‌های ⁦NVMe⁩ نیازمند یک کیت کابل ⁦8SFF NVMe CPU1/2⁩ (⁦P48825-B21⁩) هستند. (⁦FA⁩)

    Parts on the other side: P48825-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If this NVMe Bundle is selected then Qty 1 of HPE ProLiant DL380 Gen11 8NVMe CPU1/2 Cable Kit must be selected and defaulted.
    Source: a50004307enw — page 44
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 44View documentVendor siteSearch this document
    If this NVMe Bundle is selected, then Qty 1 of HPE ProLiant DL380 Gen11 8NVMe CPU1/2 Cable Kit (P48825-B21) must be selected and defaulted.
  • RequirementThis part is the condition of the rule

    بسته ⁦8NVMe 1P⁩ نیازمند یک قفسه ⁦8SFF U.3 x4⁩ (⁦P48814-B21⁩) است. (⁦FA⁩)

    Parts on the other side: P48814-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If 8NVMe Bundle is selected then Qty 1 (min/max) of 8SFF U.3 x4 cage OR 8SFF U.2 x4 cage must be selected.
  • Maximum quantityThe rule applies only when this part is selected

    با بسته ⁦8NVMe 1P⁩ دقیقاً یک قفسه ⁦8SFF U.3 x4⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If 8NVMe Bundle is selected then Qty 1 (min/max) of 8SFF U.3 x4 cage OR 8SFF U.2 x4 cage must be selected.
  • IncompatibilityThis part is one side of an incompatibility

    بسته ⁦8NVMe 1P⁩ و کیت کابل ⁦Primary 3x16⁩ (⁦P56073-B21⁩) همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P56073-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If 8NVMe 1P Bundle is selected then Primary 3 x16 Cable Kit cannot be selected and vice-versa.
  • RequirementThe rule applies only when this part is selected

    با قفسه ⁦8SFF U.3 x1⁩ (⁦P48813-B21⁩) همراه بسته ⁦8/16 NVMe⁩، انتخاب یکی از کنترلرهای ذخیره‌سازی داخلی (⁦MR416i-p/-o⁩، ⁦MR216i-p/-o⁩، ⁦MR408i-o⁩، ⁦SR932i-p⁩) الزامی است؛ کنترلر خارجی ⁦E208e-p⁩ (⁦804398-B21⁩) این الزام را برآورده نمی‌کند (به‌جز ⁦SR308i-o/SR308i-p⁩ که در این سند قلم سفارشی ندارند). (⁦FA⁩)

    Parts on the other side: P48813-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If 8SFF U.3 x1 Cage is selected along with 8 OR 16 NVMe bundle then controller must be selected except SR308i-o/SR308i-p.
    Source: a50004307enw — page 45
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 45View documentVendor siteSearch this document
    If 8SFF U.3 x1 drive cage (P48813-B21) is selected along with 8 OR 16 NVMe bundle, then controller must be selected.

Official notes (verbatim QuickSpecs text)

  • This bundle provides Direct Attach to 8NVMe Drives through First/ Single Processor.
  • If NVMe bundle is selected then defaulted Controller has to be deselected.
  • If this NVMe Bundle is selected then Qty 1 of HPE ProLiant DL380 Gen11 8NVMe CPU1/2 Cable Kit must be selected and defaulted.
  • If this NVMe Bundle/ EDSFF Bundle is selected then Qty 1 of High-Performance Fan Kit must be selected and defaulted.
  • If 8NVMe Bundle is selected then Qty 1 (min/max) of 8SFF U.3 x4 cage OR 8SFF U.2 x4 cage must be selected.
  • NVMe Bundle is supported with 8SFF CTO Server Only.
  • If 8SFF U.3 x1 Cage is selected along with 8 OR 16 NVMe bundle then controller must be selected except SR308i-o/SR308i-p.
  • If 8NVMe 1P Bundle is selected then Primary 3 x16 Cable Kit cannot be selected and vice-versa.

Verification and sources

PartSurfer status: Not found in PartSurfer; verified from the official document

Document row: a50004307enw — page 43
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 8NVMe 1P FIO Bundle Kit P69548-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.