P73286-B21
Base modelHPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to- Order Server
HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to-Order Server
Source: a00073551enw — page 29
HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to-Order Server SKU Number P73286-B21
Verified in 1 active model(s): HPE ProLiant DL380 Gen12
Documentation of this part
Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).
What it is
- HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to-Order Server (P73286-B21).
Why this part number
- Form factor: 2U.
- Front drive cage options for this server include the HPE Gen12 12EDSFF Kit (P74738-B21).
Features
- Processor: not included as default. Memory: 32-DIMM slots for HPE ProLiant Compute DDR5 Smart Memory, not included as default; select capacity and quantity from available DIMMs.
- DIMM Blanks: optional, not included as default. Heat sinks: choice of standard, performance, high performance or max performance heatsinks.
- Fans included as default: 6-Standard.
- Rear PCIe slots: up to 8 PCIe Gen5 slots (up to 6 x16 & up to 2 x8); default primary riser slots 1, 2 & 3 (x8 x16 x8 bus width); optional secondary and tertiary risers.
- OCP 3.0 - Rear: up to 2 PCIe 5.0; OCP A (Default) and OCP B (Optional).
- Network controller: no embedded networking. Choice of either OCP 3.0 or select stand-up network adapters for primary networking selection plus additional/optional stand-up network adapters.
- Storage controller: not included as default. Choice of Intel® Virtual RAID on CPU (VROC) for HPE ProLiant. HPE Compute MR Gen11 Controllers.
- Storage controller: HPE NS204i-u V2 NVMe Hot Plug Boot Optimized Storage Device at Rear, internal or front cage (front cage is available in SFF/EDSFF CTO Server only).
- I/O ports - Front: 1 USB 3.2 Gen1, 1 USB-C iLO service port, 1 DisplayPort (optional), 2 USB 2.0 (optional via UMB). Rear: Two (2) USB 3.2 Gen1, 1 iLO Management Ethernet Port, VGA port, 1 optional Serial Port. Internal: Two (2) USB 3.0.
- Security: Trusted Platform Module (TPM) 2.0, an embedded feature globally that can be disabled in the BIOS setting. HPE Trusted Supply Chain: P36394-B21 – Optional. Rail kit: optional Easy Install rails and CMA.
- Front drive cage options: HPE Gen12 12EDSFF Kit (P74738-B21) and HPE DL3XX Gen12 8SFF x4 U.3 TM Kit (P75741-B21) or DL3XX Gen12 8SFF x1 U.3 TM Kit (P75740-B21) or/and DL3XX Gen12 Multipurpose Drive Cage Kit (P76449-B21).
- Management: HPE iLO with Intelligent Provisioning (standard), iLO Advanced and OneView (optional). Warranty: 3-year parts, 3-year labor, 3-year onsite support with next business day response.
Official notes
- Please refer to Advisory: HPE ProLiant Compute Gen12 Servers - HPE Intelligent Provisioning 5.00 Is Available with Limited Feature Support.
- CTO Server models do not include embedded LOM. To enable networking capability please select a validated alternative NIC -OCP or PCIe- from the Core Options section.
Compatibility & limits
- Optional 2 SFF Drives (Front): not available.
- Internal optical drives are not supported with 24SFF, 12LFF, or EDSFF CTO Server configurations.
Description
Base with NVMe cage
A chassis whose front bays are connected to PCIe lanes through a dedicated NVMe backplane and accept NVMe SSDs directly (Direct) or through an NVMe-capable RAID controller (the allowed controller type depends on the vendor and server model).
NVMe has the lowest latency and highest bandwidth of the storage interfaces and suits high-transaction databases and software-defined storage.
Removing the SAS/SATA layer and talking directly to the processor greatly increases IOPS and reduces latency.
This text is the general explanation of this category of part (not a claim about one specific model).
Active models in which this part is listed
Verification and sources
PartSurfer status: Matches PartSurfer
PartSurfer: HPE PROLIANT COMPUTE DL380 GEN12 EDSFF NC CONFIGURE-TO-ORDER SERVER
Document row: a00073551enw — page 28
HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to- Order Server SKU Number P73286-B21
Document row: a00073551enw — page 28
HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to- Order Server TAA SKU* P73286-B21#GTA
Document row: a00073551enw — page 29
HPE ProLiant Compute DL380 Gen12 EDSFF NC Configure-to-Order Server SKU Number P73286-B21
This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.