Kimia Shop
FAEN

S0K89C

Graphics card

NVIDIA L4 24GB PCIe Accelerator for HPE

Verified in 3 active model(s): HPE ProLiant DL380 Gen12, HPE ProLiant DL380 Gen11, HPE ProLiant DL380 Gen10 Plus

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • NVIDIA L4 24GB PCIe Accelerator for HPE (S0K89C).

Features

  • Maximum quantity 8 of single wide GPUs can be supported. Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).

Official notes

  • Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.
  • Mixing of GPUs is not allowed
  • GPU and rear drive options cannot be selected together.
  • Maximum quantity 8 of single wide GPUs can be supported.
  • Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).
  • Select the table that matches the processor TDP and cooling solution. Then locate the applicable front drive cage type, quantity, and location, followed by the GPU installation slot. The value shown is the maximum supported server ambient temperature for that GPU configuration.
  • After determining the value from this matrix, compare it with the limits from all other applicable Thermal Support Matrices and configuration rules. When multiple components or configuration rules have thermal restrictions, the lowest applicable maximum server ambient temperature determines the supported operating temperature of the complete server configuration.

Compatibility & limits

  • Mixing of GPUs is not allowed.

How it differs

  • Capacity is 24GB, while S5T74C is 8GB.

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Memory
24

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S0K89CP63875-B21P49045-B21P49041-B21P49035-B21P49031-B21P49029-B21P63871-B21P49057-B21P49053-B21P49049-B21P49047-B21R8M41AP25960-B21P21112-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel. 22 more related part(s) were left off the map for legibility; the rule list on this page is more complete.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P63875-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49045-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49041-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49035-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49031-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49029-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P63871-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49057-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49053-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49049-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49047-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: R8M41A and S0K89C are incompatible. ⁦GPU⁩ با کارت شبکه/⁦InfiniBand/Smart IO⁩ با سرعت ۴۰ گیگابیت یا بیشتر قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P25960-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با کارت شبکه/⁦InfiniBand/Smart IO⁩ با سرعت ۴۰ گیگابیت یا بیشتر قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P21112-B21⁩ and S0K89C are incompatible. ⁦GPU⁩ با کارت شبکه/⁦InfiniBand/Smart IO⁩ با سرعت ۴۰ گیگابیت یا بیشتر قابل انتخاب نیست. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Graphics accelerators»Maximum quantity: 8Add to this model's configuration

Related rules (1)

  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    GPU and rear drive options cannot be selected together.

HPE ProLiant DL380 Gen11

step «Graphics accelerators»Maximum quantity: 8Add to this model's configuration

Related rules (5)

  • Maximum quantityThe rule limits this part

    روی مدل ⁦12LFF⁩ بدون ⁦DLC⁩ حداکثر ۵ ⁦GPU⁩ مدل ⁦L4⁩ مجاز است (با ⁦DLC⁩ تا ۸). (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages are selected without DLC component then Max of 5 can be selected per server.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦24SFF⁩ بدون ⁦DLC⁩ حداکثر ۵ ⁦GPU⁩ مدل ⁦L4⁩ مجاز است (با ⁦DLC⁩ تا ۸). (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages are selected without DLC component then Max of 5 can be selected per server.
  • WarningThe rule applies only when this part is selected

    روی مدل ⁦8SFF⁩ با سه قفسه ⁦8SFF⁩ جلو و بدون ⁦DLC⁩ حداکثر ۵ ⁦GPU⁩ مدل ⁦L4⁩ مجاز است (با ⁦DLC⁩ تا ۸)؛ این سقف مشروط به نبود ⁦DLC⁩ با ⁦DSL⁩ فعلی به‌صورت خطای قطعی قابل بیان نیست و باید دستی کنترل شود. (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages are selected without DLC component then Max of 5 can be selected per server.
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF/ 8LFF/ 12LFF/ 12EDSFF CTO Server, If GPU is selected then High-Performance Fan Kit must be selected and defaulted.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    Requires selection of High-Performance Fan Kit.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48805-B21P48806-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    GPU and NEBS Riser cannot be selected together.

HPE ProLiant DL380 Gen10 Plus

step «GPUs and accelerators»Maximum quantity: 8Add to this model's configuration

Only with these base models: P05172-B21P05173-B21P05175-B21

Related rules (6)

  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P63875-B21P49045-B21P49041-B21P49035-B21P49031-B21P49029-B21P63871-B21P49057-B21P49053-B21P49049-B21P49047-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    NVIDIA H100 NVL SAS4 Drives cannot be selected together.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This Graphics option and SAS4 Drives cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩ با کارت شبکه/⁦InfiniBand/Smart IO⁩ با سرعت ۴۰ گیگابیت یا بیشتر قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: R8M41AP25960-B21P21112-B21P10180-B21R4K46AP22767-B21P45642-B22P31348-B21P23664-B21P31324-B21829335-B21P23665-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    NVIDIA H100 NVL and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    Graphics Option and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    این ⁦GPU⁩ با رایزر ⁦NEBS⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P14575-B21P14577-B21

    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This GPU and NEBS Riser cannot be selected together.
  • WarningThe rule applies only when this part is selected

    طبق سند ظرفیت حافظه‌ی سیستم باید کمتر از «۱۲۸ ترابایت» باشد (احتمالاً اشتباه تایپی سند؛ بررسی کارشناس). (⁦FA⁩)

    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    If this graphics option is selected, the system memory capacity must be less than 128TB
  • RequirementA general rule that covers this part through its attributes

    نصب ⁦GPU⁩ به هیت‌سینک پرفورمنس بالا (⁦P27095-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P27095-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    Required for GPU installations.
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ به کیت فن ⁦Maximum Performance⁩ (⁦P14608-B21⁩) نیاز دارد (⁦24SFF⁩ فن پرفورمنس استاندارد دارد). (⁦FA⁩)

    Parts on the other side: P14608-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    Requires the Max Performance Fan Kit (P14608-B21) to be selected.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This option requires the Max Performance Fan Kit (P14608-B21) to be selected.

Official notes (verbatim QuickSpecs text)

  • Max = 8.
  • System memory should be 2x of GPU memory.
  • Requires selection of High-Performance Fan Kit.
  • On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages are selected without DLC component then Max of 5 can be selected per server.
  • Maximum Qty = 8, dependent on riser selection.
  • This option cannot be selected with 12LFF Model X.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: NVIDIA L4 24GB PCIE ACCELERATOR FOR HPE

Document row: a00073551enw — page 59
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
NVIDIA L4 24GB PCIe Accelerator for HPE S0K89C

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.