Kimia Shop
FAEN

S6W30C

Graphics cardNeeds expert review

NVIDIA RTX PRO 4500 Blackwell Server Edition 32GB PCIe Accelerator for HPE

Verified in 1 active model(s): HPE ProLiant DL380 Gen12

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • NVIDIA RTX PRO 4500 Blackwell Server Edition 32GB PCIe Accelerator for HPE S6W30C.

Features

  • Maximum of 5 (subject to PCIe slot/thermal rules).
  • Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).

Official notes

  • Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.
  • Mixing of GPUs is not allowed
  • GPU and rear drive options cannot be selected together.
  • Maximum of 5 (subject to PCIe slot/thermal rules)
  • Cannot be installed in Primary Riser Slot 3 or Secondary Riser Slot 6, which support half-length/low-profile cards only.
  • Qty 1 of HPE DL380 Gen11 2U 8p GPU Power Cable Kit (P77896-B21) must be selected. One kit contains three Y- cables; each cable supports up to two GPUs, covering the maximum of 5 GPUs. Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).
  • Final configuration support must be validated in HPE One Config Advanced (OCA), which automatically applies applicable configuration and ambient-temperature rules.
  • Select the table that matches the processor TDP and cooling solution. Then locate the applicable front drive cage type, quantity, and location, followed by the GPU installation slot. The value shown is the maximum supported server ambient temperature for that GPU configuration.
  • After determining the value from this matrix, compare it with the limits from all other applicable Thermal Support Matrices and configuration rules. When multiple components or configuration rules have thermal restrictions, the lowest applicable maximum server ambient temperature determines the supported operating temperature of the complete server configuration.
  • Values shown are the maximum supported server ambient temperatures in °C for the applicable GPU configuration.
  • X = Not supported.
  • The Universal Media Bay (UMB) and Multipurpose Drive Cage are not included in the front drive cage count because they have less impact on airflow.
  • For mixed front drive cage configurations, such as SFF plus EDSFF, use the EDSFF rule with the combined front drive cage quantity.

Compatibility & limits

  • Cannot be installed in Primary Riser Slot 3 or Secondary Riser Slot 6, which support half-length/low-profile cards only.
  • Qty 1 of HPE DL380 Gen11 2U 8p GPU Power Cable Kit (P77896-B21) must be selected.
  • Mixing of GPUs is not allowed.

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Memory
32

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S6W30CP74743-B21P74734-B21P74746-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P74743-B21⁩ and S6W30C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)
  • Incompatible: ⁦P74734-B21⁩ and S6W30C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)
  • Incompatible: ⁦P74746-B21⁩ and S6W30C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Graphics accelerators»Maximum quantity: 5Add to this model's configuration

Related rules (3)

  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ مدل ⁦RTX PRO 4500⁩ به یک کیت کابل برق ۸ پین ⁦GPU⁩ (⁦P77896-B21⁩) نیاز دارد؛ این قطعه ردیف جداگانه‌ای در سند ندارد و در کاتالوگ نیست. (⁦FA⁩)

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Qty 1 of HPE DL380 Gen11 2U 8p GPU Power Cable Kit (P77896-B21) must be selected.
  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ مدل ⁦RTX PRO 4500⁩ را نمی‌توان در اسلات ⁦3⁩ رایزر اولیه یا اسلات ⁦6⁩ رایزر ثانویه (فقط کارت نیم‌طول/کم‌ارتفاع) نصب کرد. (⁦FA⁩)

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Cannot be installed in Primary Riser Slot 3 or Secondary Riser Slot 6, which support half-length/low-profile cards only.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    GPU and rear drive options cannot be selected together.

Official notes (verbatim QuickSpecs text)

  • Maximum of 5 (subject to PCIe slot/thermal rules)
  • Cannot be installed in Primary Riser Slot 3 or Secondary Riser Slot 6, which support half-length/low-profile cards only.
  • Qty 1 of HPE DL380 Gen11 2U 8p GPU Power Cable Kit (P77896-B21) must be selected. One kit contains three Y- cables; each cable supports up to two GPUs, covering the maximum of 5 GPUs. Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: NVIDIA RTX PRO 4500 BLACKWELL SERVER EDITION 32GB PCIE ACCELERATOR FOR HPE

Document row: a00073551enw — page 59
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
NVIDIA RTX PRO 4500 Blackwell Server Edition 32GB PCIe Accelerator for HPE S6W30C

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.