Kimia Shop
FAEN

P25903-B21

Drive cage

HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit

Verified in 1 active model(s): HPE ProLiant DL380 Gen10 Plus

Description

Rear drive cage

A rear cage creates extra drive bays at the back of the chassis, usually in place of one of the PCIe risers.

It is used to add boot drives or cache drives without taking front bays.

The chassis's maximum number of drives increases and the front bays stay available for data.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

LFF bays
2

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P25903-B21P14580-B21P55519-B21P26920-B21P36929-B21P36938-B21P36939-B21S2D86CR9S41CS0K90C

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P14580-B21⁩ and ⁦P25903-B21⁩ are incompatible. رایزر ⁦P25903-B21⁩ و ⁦P14580-B21⁩ با هم قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P14580-B21⁩ and ⁦P25903-B21⁩ are incompatible. با ⁦P14580-B21⁩ رایزر ثانویه قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P25903-B21⁩ and ⁦P55519-B21⁩ are incompatible. با قفسه ⁦P55519-B21⁩ رایزر ثانویه قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P25903-B21⁩ and ⁦P26920-B21⁩ are incompatible. وقتی ⁦P26920-B21⁩ کنار رایزر اصلی دیگر قرار گیرد نقش رایزر ثانویه را دارد؛ رایزر ثانویه‌ی دیگر مجاز نیست. (⁦FA⁩)
  • Requires: ⁦P25903-B21⁩ requires ⁦P36929-B21⁩. این رایزر/قفسه به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P25903-B21⁩ requires ⁦P36938-B21⁩. این رایزر/قفسه به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P25903-B21⁩ requires ⁦P36939-B21⁩. این رایزر/قفسه به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)
  • Incompatible: ⁦P25903-B21⁩ and S2D86C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P25903-B21⁩ and R9S41C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P25903-B21⁩ and S0K90C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10 Plus

step «Drive cages and bays»Maximum quantity: 1Add to this model's configuration

Only with these base models: P05175-B21P05174-B21

Related rules (11)

  • IncompatibilityThis part is one side of an incompatibility

    رایزر ⁦P25903-B21⁩ و ⁦P14580-B21⁩ با هم قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P14580-B21

    Source: a50002553enw — page 40
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 40View documentVendor siteSearch this document
    HPE DL38X Gen10 Plus 2LFF LP Sec Riser Kit (P25903-B21) and HPE DL38X Gen10 Plus 2LFF Tertiary FIO Kit (P14580-B21) cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    با قفسه ⁦P55519-B21⁩ رایزر ثانویه قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P55519-B21

    Source: a50002553enw — page 39
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 39View documentVendor siteSearch this document
    Secondary riser cannot be selected if this option is selected.
  • IncompatibilityThis part is one side of an incompatibility

    با ⁦P14580-B21⁩ رایزر ثانویه قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P14580-B21

    Source: a50002553enw — page 40
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 40View documentVendor siteSearch this document
    Secondary Riser CANNOT be selected if this option is selected.
  • RequirementThis part is the condition of the rule

    این رایزر/قفسه به پردازنده‌ی دوم نیاز دارد. (⁦FA⁩)

    Source: a50002553enw — page 52
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 52View documentVendor siteSearch this document
    For a Secondary/Tertiary riser, the second processor is required.
    Source: a50002553enw — page 52
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 52View documentVendor siteSearch this document
    Requires selection of a 2nd processor
  • Maximum quantityThe rule limits this part

    حداکثر یک رایزر ثانویه (⁦Secondary⁩) در هر سرور مجاز است. (⁦FA⁩)

    Source: a50002553enw — page 40
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 40View documentVendor siteSearch this document
    Since this option is part of the Riser assembly, it must be classified as a Secondary Riser and Max Qty=1 secondary Risers is allowed per server.
    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • Maximum quantityThe rule limits this part

    با ۲ عدد ⁦P26920-B21⁩ هیچ رایزر اصلی/ثانویه‌ی دیگری مجاز نیست. (⁦FA⁩)

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    If Qty 2 are selected then it will be installed into both Primary Riser and Secondary Riser location. No other Primary Riser and Secondary Riser are allowed.
  • IncompatibilityThis part is one side of an incompatibility

    وقتی ⁦P26920-B21⁩ کنار رایزر اصلی دیگر قرار گیرد نقش رایزر ثانویه را دارد؛ رایزر ثانویه‌ی دیگر مجاز نیست. (⁦FA⁩)

    Parts on the other side: P26920-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    If other Primary Riser is selected along with it, then it will be considered as Secondary Riser and vice-versa (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • Maximum quantityThe rule limits this part

    Only two primary/secondary riser positions: rear 2SFF cages (P55696, P26920) + the primary-riser-position 2LFF cage (P55518) + primary/secondary risers ≤ 2.

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    2SFF Rear Cage (Primary/ Secondary Riser position)
    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • Maximum quantityThe rule limits this part

    At most 4 rear LFF drives (two rear 2LFF cages).

    Source: a50002553enw — page 5
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 5View documentVendor siteSearch this document
    and up to 4LFF rear or 6SFF rear drive bay options
    Source: a50002553enw — page 5
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 5View documentVendor siteSearch this document
    12LFF with optional 4LFF mid tray and up to 4LFF rear for a total 20LFF drives
  • WarningThe rule applies only when this part is selected

    QuickSpecs lists 8LFF with up to 4LFF rear OR 6SFF rear; confirm a rear 2SFF + rear 2LFF combination with HPE.

    Source: a50002553enw — page 5
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 5View documentVendor siteSearch this document
    and up to 4LFF rear or 6SFF rear drive bay options
  • IncompatibilityA general rule that covers this part through its attributes

    با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: S2D86CR9S41CS0K90C

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If H100 GPU is selected then no rear drive cage can be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If L40 GPU is selected then no rear drive cage can be selected.

Official notes (verbatim QuickSpecs text)

  • Max Qty=1 secondary Risers is allowed per server.
  • Can be selected only with 8LFF Model X and 12LFF Model X.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE DL38X GEN10 PLUS 2LFF LOW PROFILE SECONDARY RISER KIT

Document row: a50002553enw — page 40
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 40View documentVendor siteSearch this document
HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit P25903-B21
Document row: a50002553enw — page 46
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 46View documentVendor siteSearch this document
HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit P25903-B21
Document row: a50002553enw — page 54
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 54View documentVendor siteSearch this document
P25903-B21 HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit N O N - - - - -

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.