Kimia Shop
FAEN

S0K90C

Graphics card

NVIDIA L40 48GB PCIe Accelerator for HPE

NVIDIA L40 48GB PCIe Accelerator 1, 2 or 3 Gen4 3@25 C (Air) 2@30 C (Air) 3@30 C (DLC) 2@30 C (Air) 3@25 C (DLC) 2@30 C (Air) if CPU ≤ 185 W 3@25 C (Air) if CPU ≤ 185 W 1@25 C (Air) 2@25 C (DLC) 2@25 C (Air) if CPU ≤ 185 W

Source: a50004307enw — page 68
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
S0K90C NVIDIA L40 48GB PCIe Accelerator 1, 2 or 3 Gen4 3@25 C (Air) 2@30 C (Air) 3@30 C (DLC) 2@30 C (Air) 3@25 C (DLC) 2@30 C (Air) if CPU ≤ 185 W 3@25 C (Air) if CPU ≤ 185 W 1@25 C (Air) 2@25 C (DLC) 2@25 C (Air) if CPU ≤ 185 W

Verified in 2 active model(s): HPE ProLiant DL380 Gen11, HPE ProLiant DL380 Gen10 Plus

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Memory
48

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S0K90CP48809-B21P48815-B21P48816-B21P48804-B21P62023-B21P62029-B21P63875-B21P49045-B21P49041-B21P49035-B21P49031-B21P49029-B21P63871-B21P49057-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel. 39 more related part(s) were left off the map for legibility; the rule list on this page is more complete.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P48809-B21⁩ and S0K90C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48815-B21⁩ and S0K90C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48816-B21⁩ and S0K90C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P48804-B21⁩. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).
  • Requires: S0K90C requires ⁦P62023-B21⁩. 12EDSFF CTO with one additional 8SFF cage: max 2 L40 without DLC, max 3 with DLC (DLC needed >= L40 + 8SFF cages - 3).
  • Requires: S0K90C requires ⁦P62023-B21⁩. با ⁦GPU⁩ تمام‌طول (⁦FL⁩) برای پردازنده‌ها هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ الزامی است. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P62023-B21⁩. روی مدل ⁦8SFF⁩: با یک قفسه ۳ ⁦GPU⁩ مدل ⁦L40⁩؛ با دو قفسه ۲ ⁦GPU⁩ (با ⁦DLC⁩ تا ۳)؛ با سه قفسه ۱ ⁦GPU⁩ (با ⁦DLC⁩ تا ۲) — مازاد بر این بدون کیت ⁦DLC⁩ مجاز نیست. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P62029-B21⁩. 12EDSFF CTO with one additional 8SFF cage: max 2 L40 without DLC, max 3 with DLC (DLC needed >= L40 + 8SFF cages - 3).
  • Requires: S0K90C requires ⁦P62029-B21⁩. با ⁦GPU⁩ تمام‌طول (⁦FL⁩) برای پردازنده‌ها هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ الزامی است. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P62029-B21⁩. روی مدل ⁦8SFF⁩: با یک قفسه ۳ ⁦GPU⁩ مدل ⁦L40⁩؛ با دو قفسه ۲ ⁦GPU⁩ (با ⁦DLC⁩ تا ۳)؛ با سه قفسه ۱ ⁦GPU⁩ (با ⁦DLC⁩ تا ۲) — مازاد بر این بدون کیت ⁦DLC⁩ مجاز نیست. (⁦FA⁩)
  • Incompatible: ⁦P63875-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49045-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49041-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49035-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49031-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49029-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P63871-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P49057-B21⁩ and S0K90C are incompatible. ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Graphics accelerators»Maximum quantity: 3Add to this model's configuration

Related rules (18)

  • RequirementThis part is the condition of the rule

    ⁦GPU⁩های ⁦L40⁩ و ⁦H100⁩ نیازمند کیت کابل برق ⁦GPU⁩ دو‌اسلاتی (⁦P56072-B21⁩) هستند. (⁦FA⁩)

    Parts on the other side: P56072-B21

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    This GPU requires HPE ProLiant Double Wide GPU Power Cable Kit- P56072-B21
    Source: a50004307enw — page 67
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 67View documentVendor siteSearch this document
    This GPU power cable is used for NVIDIA H100 and NVIDIA L40 GPUs.
  • Maximum quantityThe rule limits this part

    هر کیت کابل ⁦P56072-B21⁩ حداکثر از ۳ ⁦GPU⁩ پشتیبانی می‌کند. (⁦FA⁩)

    Source: a50004307enw — page 67
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 67View documentVendor siteSearch this document
    One power cable supports up to 3x GPUs.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦8LFF⁩ حداکثر ۲ ⁦GPU⁩ مدل ⁦L40⁩ بدون ⁦DLC⁩ و ۳ عدد با ⁦DLC⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8LFF CTO Server, if NO DLC component is selected then Max of 2 GPU can be selected per Server.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8LFF CTO Server, if DLC component is selected then Max of 3 GPU can be selected per Server.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦12LFF⁩ حداکثر ۱ ⁦GPU⁩ مدل ⁦L40⁩ بدون ⁦DLC⁩ و ۲ عدد با ⁦DLC⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages if NO DLC component is selected then Max of 1 GPU can be selected per Server.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages and DLC component is selected then Max of 2 GPU can be selected per Server.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦24SFF⁩ حداکثر ۱ ⁦GPU⁩ مدل ⁦L40⁩ بدون ⁦DLC⁩ و ۲ عدد با ⁦DLC⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages if NO DLC component is selected then Max of 1 GPU can be selected per Server.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages and DLC component is selected then Max of 2 GPU can be selected per Server.
  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ دو‌اسلاتی اسلات ⁦x16⁩ بالایی رایزر را اشغال می‌کند و روی بعضی رایزرها (با قفسه ⁦2SFF⁩) قابل نصب نیست. (برای ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ استنباطی است). (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space.
  • Maximum quantityThe rule limits this part

    کیت‌های کابل ⁦Primary/Secondary 3x16⁩ با ۲ یا ۳ ⁦GPU⁩ دوبل‌ویدث بدون رایزر ⁦Tertiary⁩ قابل انتخاب نیستند؛ بدون رایزر ⁦Tertiary⁩ (⁦P48804-B21⁩) حداکثر ۱ ⁦GPU⁩ دوبل‌ویدث مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty 2 or 3 of DW GPU is selected with no tertiary riser, then primary 3 x16 riser cable and secondary 3 x16 Riser Cable cannot be selected.
  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48809-B21P48815-B21P48816-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Full Length (FL) PCIe Card and Mid Tray cannot be selected together.
  • RequirementThis part is the condition of the rule

    با ⁦GPU⁩ تمام‌طول (⁦FL⁩) برای پردازنده‌ها هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ الزامی است. (⁦FA⁩)

    Parts on the other side: P48818-B21P48905-B21P62023-B21P62029-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected then High-Performance HS or DLC must be selected for Processors.
  • RequirementThe rule applies only when this part is selected

    با پردازنده‌های ⁦8593Q⁩ و ⁦6558Q⁩ اگر ⁦GPU⁩ تمام‌طول (⁦FL⁩) انتخاب شود، ماژول ⁦DLC⁩ باید برای پردازنده‌ها انتخاب شود. (⁦FA⁩)

    Parts on the other side: P68449-B21P67098-B21

    Source: a50004307enw — page 32
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 32View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected with this Processor then DLC Module must be selected for Processors.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦8SFF⁩: با یک قفسه ۳ ⁦GPU⁩ مدل ⁦L40⁩؛ با دو قفسه ۲ ⁦GPU⁩ (با ⁦DLC⁩ تا ۳)؛ با سه قفسه ۱ ⁦GPU⁩ (با ⁦DLC⁩ تا ۲) — مازاد بر این بدون کیت ⁦DLC⁩ مجاز نیست. (⁦FA⁩)

    Parts on the other side: P62023-B21P62029-B21

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8SFF CTO Server, if Qty1 of 8SFF Front cage is selected then Max of 3 GPU can be selected per Server.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8SFF CTO Server, if Qty2 of 8SFF Front cage is selected without DLC component then Max of 2 GPU can be selected per Server.
  • Maximum quantityThe rule limits this part

    هر ⁦GPU⁩ دوبل‌ویدث (⁦L40⁩ و ⁦H100⁩) باید در اسلات ⁦x16⁩ نصب شود و روی رایزر ⁦Primary⁩ پیش‌فرض (⁦x8/x16/x8⁩) اسلات ⁦x16⁩ بالایی را اشغال می‌کند؛ بنابراین تعداد این ⁦GPU⁩ها حداکثر ۱ + تعداد رایزرهای ⁦Secondary/Tertiary⁩ انتخاب‌شده است (رایزر ⁦Secondary/Tertiary⁩ نیازمند پردازنده دوم است). (جمع‌بندی محافظه‌کارانه از چند یادداشت سند.) (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Must be populated in x16 slot.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space.
  • RequirementThis part is the condition of the rule

    2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • Maximum quantityThe rule limits this part

    The 2LFF primary rear cage consumes all Primary-riser slots, so double-wide GPUs <= number of Secondary/Tertiary risers.

    Source: a50004307enw — page 7
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 7View documentVendor siteSearch this document
    The 2LFF primary and 2LFF secondary rear cages will consume all PCIe slots for the primary and secondary riser, respectively.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Must be populated in x16 slot.
  • RequirementThis part is the condition of the rule

    12EDSFF CTO with one additional 8SFF cage: max 2 L40 without DLC, max 3 with DLC (DLC needed >= L40 + 8SFF cages - 3).

    Parts on the other side: P62023-B21P62029-B21

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12EDSFF CTO Server, if one additional 8SFF cage is selected without DLC Component then Max 2 GPU can be selected per sever.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 3 GPU can be selected per sever.
  • WarningThe rule applies only when this part is selected

    Some GPU Information table entries for this GPU apply only 'if CPU <= 185 W'; the selected CPU is above 185 W.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    3@30 C (Air) if Max 1100
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF/ 8LFF/ 12LFF/ 12EDSFF CTO Server, If GPU is selected then High-Performance Fan Kit must be selected and defaulted.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    Requires selection of High-Performance Fan Kit.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48805-B21P48806-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    GPU and NEBS Riser cannot be selected together.

HPE ProLiant DL380 Gen10 Plus

step «GPUs and accelerators»Maximum quantity: 2Add to this model's configuration

Only with these base models: P05172-B21

Related rules (15)

  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩ با درایو ⁦SAS4⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P63875-B21P49045-B21P49041-B21P49035-B21P49031-B21P49029-B21P63871-B21P49057-B21P49053-B21P49049-B21P49047-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    NVIDIA H100 NVL SAS4 Drives cannot be selected together.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This Graphics option and SAS4 Drives cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩ با کارت شبکه/⁦InfiniBand/Smart IO⁩ با سرعت ۴۰ گیگابیت یا بیشتر قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: R8M41AP25960-B21P21112-B21P10180-B21R4K46AP22767-B21P45642-B22P31348-B21P23664-B21P31324-B21829335-B21P23665-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    NVIDIA H100 NVL and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    Graphics Option and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    این ⁦GPU⁩ با رایزر ⁦NEBS⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P14575-B21P14577-B21

    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This GPU and NEBS Riser cannot be selected together.
  • IncompatibilityThis part is one side of an incompatibility

    با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If H100 GPU is selected then no rear drive cage can be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If L40 GPU is selected then no rear drive cage can be selected.
  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ به یکی از رایزرهای اصلی ⁦P14599-B21⁩، ⁦P14592-B21⁩ یا ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P14599-B21P14592-B21P27090-B21

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If Qty1 of H100 GPU is selected then any one of below Primary Riser must be selected.
    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    If Qty1 L40 GPU is selected then any one of below Primary Riser must be selected.
  • RequirementThis part is the condition of the rule

    با ۲ ⁦GPU⁩ علاوه بر رایزر اصلی، یک رایزر ثانویه (⁦P14590-B21⁩، ⁦P14589-B21⁩ یا ⁦P27089-B21⁩) لازم است. (⁦FA⁩)

    Parts on the other side: P14590-B21P14589-B21P27089-B21

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If Qty2 of H100 GPU is selected then any one of below Primary Riser and any one of below Secondary Riser must be selected.
  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ به کابل برق ⁦P59212-B21⁩ (۱ ⁦GPU⁩) یا ⁦P61423-B21⁩ (۲ ⁦GPU⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P59212-B21P61423-B21

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If Qty1 of H100 GPU is selected then HPE DL380 G10+ 2w Cbl Kit NVIDIA H100 (P59212-B21) must be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If Qty1 of L40 GPU is selected then HPE DL380 G10+ 2w Cbl Kit NVIDIA H100 (P59212-B21) must be selected.
  • RequirementThis part is the condition of the rule

    با ۲ ⁦GPU⁩ کابل برق ۳-راهه ⁦P61423-B21⁩ لازم است. (⁦FA⁩)

    Parts on the other side: P61423-B21

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If Qty2 of H100 GPU is selected then HPE DL380 G10+ 3w Cbl Kit NVIDIA H100 (P61423-B21) must be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If Qty2 of L40 GPU is selected then HPE DL380 G10+ 3w Cbl Kit NVIDIA H100 (P61423-B21) must be selected.
  • Maximum quantityThe rule applies only when this part is selected

    با ⁦GPU⁩ مدل ⁦L40⁩ انتخاب ۳ قفسه‌ی ⁦8SFF⁩ (همراه ⁦Box3 Removal⁩) مجاز نیست. (⁦FA⁩)

    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    If Qty=3 of 8SFF Front drive cage and HPE 8SFF Front Remove SPEC Perf FIO is selected then this GPU cannot be selected
  • WarningThe rule applies only when this part is selected

    با ⁦L40⁩، ترکیب ۲ قفسه‌ی ⁦8SFF⁩ جلو + ⁦Universal Media Bay⁩ + قفسه‌ی ⁦2SFF⁩ جلو مجاز نیست. (⁦FA⁩)

    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    If Qty=2 of 8SFF Front drive cage is selected along with Universal Media bay and 2SFF front drive cage then this GPU cannot be selected
  • WarningThe rule applies only when this part is selected

    طبق سند ظرفیت حافظه‌ی سیستم باید کمتر از «۱۲۸ ترابایت» باشد (احتمالاً اشتباه تایپی سند؛ بررسی کارشناس). (⁦FA⁩)

    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    If this graphics option is selected, the system memory capacity must be less than 128TB
  • WarningThe rule applies only when this part is selected

    با این ⁦GPU⁩ درایوها باید کمتر از ۱۱ وات باشند. (⁦FA⁩)

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If H100 GPU is selected then Drives (NVMe/SAS/SATA) above 11W cannot be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If L40 GPU is selected then Drives (NVMe/SAS/SATA) above 11W cannot be selected.
  • WarningThe rule applies only when this part is selected

    اگر ⁦L40⁩ در رایزر اصلی جا نگیرد: بدون رایزر سوم ⁦P38771-B21⁩ و با رایزر سوم (به‌جز ⁦P27093-B21⁩) ⁦P38774-B21⁩ لازم است. (⁦FA⁩)

    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    If Qty 1 of this GPU is selected and cannot be populated in primary riser then any one of below condition to be met:
    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    Qty1 of PRI/SEC wo Retainer Kit (P38771-B21) if no tertiary riser (except 2port Slimline Tertiary (P27093-B21)) is selected
  • RequirementA general rule that covers this part through its attributes

    نصب ⁦GPU⁩ به هیت‌سینک پرفورمنس بالا (⁦P27095-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P27095-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    Required for GPU installations.
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ به کیت فن ⁦Maximum Performance⁩ (⁦P14608-B21⁩) نیاز دارد (⁦24SFF⁩ فن پرفورمنس استاندارد دارد). (⁦FA⁩)

    Parts on the other side: P14608-B21

    Source: a50002553enw — page 55
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 55View documentVendor siteSearch this document
    Requires the Max Performance Fan Kit (P14608-B21) to be selected.
    Source: a50002553enw — page 57
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 57View documentVendor siteSearch this document
    This option requires the Max Performance Fan Kit (P14608-B21) to be selected.

Official notes (verbatim QuickSpecs text)

  • Max = 3.
  • Must be populated in x16 slot.
  • System memory should be 2x of GPU memory.
  • Requires selection of High-Performance Fan Kit.
  • This GPU requires HPE ProLiant Double Wide GPU Power Cable Kit- P56072-B21
  • On 8SFF CTO Server, if Qty2 of 8SFF Front cage is selected without DLC component then Max of 2 GPU can be selected per Server.
  • On 8SFF CTO Server, if Qty1 of 8SFF Front cage is selected then Max of 3 GPU can be selected per Server.
  • On 8LFF CTO Server, if NO DLC component is selected then Max of 2 GPU can be selected per Server.
  • On 8LFF CTO Server, if DLC component is selected then Max of 3 GPU can be selected per Server.
  • On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages if NO DLC component is selected then Max of 1 GPU can be selected per Server.
  • On 12LFF CTO Server, 24SFF CTO Server, or 8SFF CTO Server with Qty3 8SFF drive cages and DLC component is selected then Max of 2 GPU can be selected per Server.
  • On 12EDSFF CTO Server, if one additional 8SFF cage is selected without DLC Component then Max 2 GPU can be selected per sever.
  • On 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 3 GPU can be selected per sever.
  • On 8SFF CTO Server, if Qty2 of 8SFF Front cage is selected with DLC component then Max of 3 GPU can be selected per Server.
  • Max Qty=2 of this GPU is allowed per server.
  • Supported only on 8SFF Model X

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: NVIDIA L40 48GB PCIE ACCELERATOR FOR HPE

Document row: a50004307enw — page 66
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
NVIDIA L40 48GB PCIe Accelerator for HPE S0K90C
Document row: a50004307enw — page 68
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
S0K90C NVIDIA L40 48GB PCIe Accelerator 1, 2 or 3 Gen4 3@25 C (Air) 2@30 C (Air) 3@30 C (DLC) 2@30 C (Air) 3@25 C (DLC) 2@30 C (Air) if CPU ≤ 185 W 3@25 C (Air) if CPU ≤ 185 W 1@25 C (Air) 2@25 C (DLC) 2@25 C (Air) if CPU ≤ 185 W

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.