Kimia Shop
FAEN

P48804-B21

Riser

HPE ProLiant DL380 Gen11 2U x16/x16 Tertiary Riser Kit

HPE DL38X Gen11 2x16 Tertiary Riser Kit N N O x16 x163

Source: a50004307enw — page 61
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 61View documentVendor siteSearch this document
P48804-B21 HPE DL38X Gen11 2x16 Tertiary Riser Kit N N O x16 x163

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Description

Tertiary riser

The tertiary riser provides extra PCIe slots in the third area at the back of the chassis.

It is used for configurations with many network cards, HBAs or GPUs.

The chassis's maximum expansion capacity is reached.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Slots
2
Lanes
x16/x16

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P48804-B21P48826-B21P51083-B21P56075-B21P56076-B21P53639-B21P53635-B21P53636-B21P53637-B21P53638-B21S0K90CR9S41CS2L70CP53632-B21R8T26C

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel. 5 more related part(s) were left off the map for legibility; the rule list on this page is more complete.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P48804-B21⁩ and ⁦P48826-B21⁩ are incompatible. با قفسه ⁦2LFF Tertiary⁩، رایزر ⁦Secondary⁩ و ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P51083-B21⁩ are incompatible. رایزر ⁦Tertiary⁩ و رایزر ⁦Secondary x16/x16/x16⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P56075-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P56076-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P53639-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P53635-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P53636-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P53637-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48804-B21⁩ and ⁦P53638-B21⁩ are incompatible. با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P48804-B21⁩. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).
  • Requires: R9S41C requires ⁦P48804-B21⁩. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).
  • Requires: S2L70C requires ⁦P48804-B21⁩. L40S cannot use the Primary riser; with a 2SFF Primary/Secondary cage (which requires the x8/x16/x8 Secondary riser) a double-wide GPU cannot use the Secondary riser either, so each L40S needs the Tertiary riser.
  • Requires: S2L70C requires ⁦P48804-B21⁩. برای ⁦GPU⁩ مدل ⁦L40S⁩ دست‌کم یک رایزر ثانویه یا ثالثیه لازم است (با دو ⁦GPU⁩ هر دو رایزر؛ رایزرهای ⁦NEBS⁩ با ⁦GPU⁩ سازگار نیستند). (⁦FA⁩)
  • Requires: S2L70C requires ⁦P48804-B21⁩. با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثالثیه ⁦P48804-B21⁩). (⁦FA⁩)
  • Requires: ⁦P48804-B21⁩ requires ⁦P53632-B21⁩. با بسته ⁦16NVMe⁩ و رایزر ⁦Tertiary⁩، کیت ⁦FIO x8 Enablement⁩ (⁦P53632-B21⁩) الزامی است. (⁦FA⁩)
  • Requires: R8T26C requires ⁦P48804-B21⁩. Inferred twin of gpu-dw-2sff-cage-riser-limit for GPUs whose double-wide form factor the document does not state. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Risers and PCIe expansion»Add to this model's configuration

Related rules (14)

  • IncompatibilityThis part is one side of an incompatibility

    با قفسه ⁦2LFF Tertiary⁩، رایزر ⁦Secondary⁩ و ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P48826-B21

    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    When 2LFF Tertiary Cage is selected then Secondary and Tertiary Riser cannot be selected.
  • RequirementThis part can satisfy the requirement of the rule

    برای ⁦GPU⁩ مدل ⁦L40S⁩ دست‌کم یک رایزر ثانویه یا ثالثیه لازم است (با دو ⁦GPU⁩ هر دو رایزر؛ رایزرهای ⁦NEBS⁩ با ⁦GPU⁩ سازگار نیستند). (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • RequirementThis part is the condition of the rule

    رایزر ثانویه یا ثالثیه نیازمند پردازنده دوم است. (⁦FA⁩)

    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    If Secondary OR Tertiary Riser is selected, then Second Processor must be selected.
    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    For a Secondary/Tertiary riser, the second processor is required.
  • IncompatibilityThis part is one side of an incompatibility

    رایزر ⁦Tertiary⁩ و رایزر ⁦Secondary x16/x16/x16⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P51083-B21

    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    Tertiary Riser and Secondary 3 x16 Riser cannot be selected together.
  • RequirementThis part is the condition of the rule

    با بسته ⁦16NVMe⁩ و رایزر ⁦Tertiary⁩، کیت ⁦FIO x8 Enablement⁩ (⁦P53632-B21⁩) الزامی است. (⁦FA⁩)

    Parts on the other side: P53632-B21

    Source: a50004307enw — page 44
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 44View documentVendor siteSearch this document
    If Tertiary Riser is selected along with 16NVMe Bundle, then 2x16 Tertiary FIO x8 Enable Kit (P53632-B21) must be selected.
  • IncompatibilityThis part is one side of an incompatibility

    با بسته‌های ⁦EDSFF⁩، ⁦32NVMe⁩ و ⁦24NVMe⁩ رایزر ⁦Tertiary⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P56075-B21P56076-B21P53639-B21P53635-B21P53636-B21P53637-B21P53638-B21

    Source: a50004307enw — page 43
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 43View documentVendor siteSearch this document
    If EDSFF Bundle is selected then Tertiary Riser cannot be selected.
    Source: a50004307enw — page 44
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 44View documentVendor siteSearch this document
    If 24NVMe/ 32NVMe Bundle is selected, then Tertiary Riser cannot be selected.
  • RequirementThis part can satisfy the requirement of the rule

    با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثالثیه ⁦P48804-B21⁩). (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • RequirementThis part can satisfy the requirement of the rule

    روی مدل ⁦8LFF⁩ با ⁦GPU⁩ مدل ⁦L40S⁩ و ماژول ⁦DLC⁩، رایزر ثالثیه باید انتخاب شود (⁦GPU⁩ روی رایزر ثالثیه نصب می‌شود). (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • RequirementThis part can satisfy the requirement of the rule

    روی مدل ⁦8SFF⁩ با دو قفسه ⁦8SFF⁩ جلو، ⁦GPU⁩ مدل ⁦L40S⁩ با ماژول ⁦DLC⁩ نیازمند رایزر ثالثیه است. (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • RequirementThis part can satisfy the requirement of the rule

    روی مدل ⁦12EDSFF⁩ با یک قفسه ⁦8SFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ با ماژول ⁦DLC⁩ نیازمند رایزر ثالثیه است. (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • Maximum quantityThe rule limits this part

    One riser per riser position (riser table p61): at most one Tertiary riser.

    Source: a50004307enw — page 61
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 61View documentVendor siteSearch this document
    Part number Description Riser position Bus width (Gen5 lanes)
    Source: a50004307enw — page 61
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 61View documentVendor siteSearch this document
    P48804-B21 HPE DL38X Gen11 2x16 Tertiary N N O
  • RequirementThis part can satisfy the requirement of the rule

    2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: S0K90CR9S41C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • RequirementThis part can satisfy the requirement of the rule

    Inferred twin of gpu-dw-2sff-cage-riser-limit for GPUs whose double-wide form factor the document does not state. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: R8T26CS2D86CS1T66C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • RequirementThis part can satisfy the requirement of the rule

    L40S cannot use the Primary riser; with a 2SFF Primary/Secondary cage (which requires the x8/x16/x8 Secondary riser) a double-wide GPU cannot use the Secondary riser either, so each L40S needs the Tertiary riser.

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    This GPU cannot be populated on primary Riser.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.

Official notes (verbatim QuickSpecs text)

  • This is the tertiary riser.
  • Slot 7 - PCIe 5.0 x16 Full Height and Full Length.
  • Slot 8 - PCIe 4.0 x16 Full Height and Full Length.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN11 2U X16/X16 TERTIARY RISER KIT

Document row: a50004307enw — page 61
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 61View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 2U x16/x16 Tertiary Riser Kit P48804-B21
Document row: a50004307enw — page 61
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 61View documentVendor siteSearch this document
P48804-B21 HPE DL38X Gen11 2x16 Tertiary Riser Kit N N O x16 x163

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.