Kimia Shop
FAEN

S1T66C

Graphics cardNeeds expert review

Intel® Data Center GPU Max 1100

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S1T66CP52533-B21P52535-B21P48809-B21P48815-B21P48816-B21P48818-B21P48905-B21P62023-B21P62029-B21P48804-B21P48805-B21P48806-B21P48820-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P52533-B21⁩ and S1T66C are incompatible. GPU Information table: H100 80GB PCIe and Intel Data Center GPU Max 1100 are 'Not Supported' in the 24SFF/12LFF column.
  • Incompatible: ⁦P52535-B21⁩ and S1T66C are incompatible. GPU Information table: H100 80GB PCIe and Intel Data Center GPU Max 1100 are 'Not Supported' in the 24SFF/12LFF column.
  • Requires: S1T66C requires ⁦P52535-B21⁩. ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)
  • Incompatible: ⁦P48809-B21⁩ and S1T66C are incompatible. ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) و قفسه ⁦mid-tray⁩ همزمان توصیه نمی‌شوند (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Incompatible: ⁦P48815-B21⁩ and S1T66C are incompatible. ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) و قفسه ⁦mid-tray⁩ همزمان توصیه نمی‌شوند (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Incompatible: ⁦P48816-B21⁩ and S1T66C are incompatible. ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) و قفسه ⁦mid-tray⁩ همزمان توصیه نمی‌شوند (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Requires: S1T66C requires ⁦P48818-B21⁩. با ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Requires: S1T66C requires ⁦P48905-B21⁩. با ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Requires: S1T66C requires ⁦P62023-B21⁩. با ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Requires: S1T66C requires ⁦P62029-B21⁩. با ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)
  • Requires: S1T66C requires ⁦P48804-B21⁩. Inferred twin of gpu-dw-2sff-cage-riser-limit for GPUs whose double-wide form factor the document does not state. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).
  • Incompatible: ⁦P48805-B21⁩ and S1T66C are incompatible. ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48806-B21⁩ and S1T66C are incompatible. ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Requires: S1T66C requires ⁦P48820-B21⁩. ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Graphics accelerators»Maximum quantity: 3Add to this model's configuration

Related rules (14)

  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ دو‌اسلاتی اسلات ⁦x16⁩ بالایی رایزر را اشغال می‌کند و روی بعضی رایزرها (با قفسه ⁦2SFF⁩) قابل نصب نیست. (برای ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ استنباطی است). (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space.
  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) و قفسه ⁦mid-tray⁩ همزمان توصیه نمی‌شوند (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)

    Parts on the other side: P48809-B21P48815-B21P48816-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Full Length (FL) PCIe Card and Mid Tray cannot be selected together.
  • RequirementThis part is the condition of the rule

    با ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ (تمام‌طول) هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)

    Parts on the other side: P48818-B21P48905-B21P62023-B21P62029-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected then High-Performance HS or DLC must be selected for Processors.
  • RequirementThe rule applies only when this part is selected

    با پردازنده‌های ⁦8593Q⁩ و ⁦6558Q⁩ و ⁦GPU⁩های ⁦A16⁩، ⁦H100 NVL⁩ یا ⁦Intel Max 1100⁩ ماژول ⁦DLC⁩ توصیه می‌شود (استنباطی: سند طول/ضخامت این ⁦GPU⁩ها را نمی‌گوید؛ ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ کارت تمام‌طول دوبل‌اسلات‌اند). (⁦FA⁩)

    Parts on the other side: P68449-B21P67098-B21

    Source: a50004307enw — page 32
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 32View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected with this Processor then DLC Module must be selected for Processors.
  • Maximum quantityThe rule limits this part

    احتمالاً این ⁦GPU⁩ نیز دوبل‌ویدث است و اسلات ⁦x16⁩ بالایی رایزر را اشغال می‌کند؛ تعداد آن حداکثر ۱ + تعداد رایزرهای ⁦Secondary/Tertiary⁩ انتخاب‌شده است. (استنباطی: سند دوبل‌ویدث بودن ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ را صریح نمی‌گوید.) (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Must be populated in x16 slot.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space.
  • RequirementThis part is the condition of the rule

    Inferred twin of gpu-dw-2sff-cage-riser-limit for GPUs whose double-wide form factor the document does not state. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • Maximum quantityThe rule limits this part

    Inferred twin of gpu-dw-2lff-primary-cage-no-primary-slot.

    Source: a50004307enw — page 7
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 7View documentVendor siteSearch this document
    The 2LFF primary and 2LFF secondary rear cages will consume all PCIe slots for the primary and secondary riser, respectively.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Must be populated in x16 slot.
  • IncompatibilityThis part is one side of an incompatibility

    GPU Information table: H100 80GB PCIe and Intel Data Center GPU Max 1100 are 'Not Supported' in the 24SFF/12LFF column.

    Parts on the other side: P52533-B21P52535-B21

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    R9S41C NVIDIA H100 80GB PCIe 2 or 3 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • Allowed quantitiesThe rule limits this part

    GPU Information table, Card Qty Supported for Intel Data Center GPU Max 1100: 2 or 3.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    number Supported
  • WarningThe rule applies only when this part is selected

    Some GPU Information table entries for this GPU apply only 'if CPU <= 185 W'; the selected CPU is above 185 W.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    3@30 C (Air) if Max 1100
  • Maximum quantityThe rule applies only when this part is selected

    Intel Max 1100 is 'Not Supported' in the 24SFF/12LFF column; 8SFF CTO with Qty3 8SFF front cages is the 24SFF configuration (by the cage<->column equivalence stated in the L40/L40S notes).

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    S1T66C Intel® Data Center GPU 2 or 3 Gen5 3@30 C(Air) 3@25 C (Air) Not Supported
  • WarningThe rule applies only when this part is selected

    12EDSFF: the GPU Information table has no 12EDSFF column. Intel Data Center GPU Max 1100 is not listed for this chassis; expert check needed.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    S1T66C Intel® Data Center GPU 2 or 3 Gen5 3@30 C(Air) 3@25 C (Air) Not Supported
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF/ 8LFF/ 12LFF/ 12EDSFF CTO Server, If GPU is selected then High-Performance Fan Kit must be selected and defaulted.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    Requires selection of High-Performance Fan Kit.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48805-B21P48806-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    GPU and NEBS Riser cannot be selected together.

Official notes (verbatim QuickSpecs text)

  • Listed only in the 'GPU Information' thermal table (page 68); the row description includes table cells. No per-GPU ordering notes in the document - consult.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: INTEL DATA CENTER GPU MAX 1100 48GB ACCELERATOR FOR HPE

Document row: a50004307enw — page 68
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
S1T66C Intel® Data Center GPU Max 1100 2 or 3 Gen5 3@30 C(Air) 3@25 C (Air) 3@30 C (Air) if CPU ≤ 185 W Not Supported

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.