Kimia Shop
FAEN

S2L70C

Graphics card

NVIDIA L40S 48GB PCIe Accelerator

Verified in 2 active model(s): HPE ProLiant DL380 Gen12, HPE ProLiant DL380 Gen11

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • NVIDIA L40S 48GB PCIe Accelerator (S2L70C).

Features

  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slot 4 and 5 or Tertiary Riser Slot 7 and 8).
  • Maximum quantity 3 (subject to PCIe slot/thermal rules).

Official notes

  • Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.
  • Mixing of GPUs is not allowed
  • GPU and rear drive options cannot be selected together.
  • Maximum quantity 3 (subject to PCIe slot/thermal rules).
  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slot 4 and 5 or Tertiary Riser Slot 7 and 8)
  • 2U High Performance Heat Sink (P74792-B21) OR DLC Module must be selected
  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).

Compatibility & limits

  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • 2U High Performance Heat Sink (P74792-B21) OR DLC Module must be selected.
  • Mixing of GPUs is not allowed.
  • GPU and rear drive options cannot be selected together.

How it differs

  • S2L70C is the NVIDIA L40S with 48GB; S3U30C is the NVIDIA H200 NVL with 141GB.
  • S6A73C is the NVIDIA RTX PRO 6000 Blackwell Server Edition with 96GB; S6W21C is the NVIDIA RTX PRO 6000D with 84GB.

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Memory
48

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S2L70CP56074-B21P56075-B21P56076-B21P48809-B21P48815-B21P48816-B21P52533-B21P52535-B21P48804-B21P56072-B21P74792-B21P74204-B21P74208-B21P51083-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel. 11 more related part(s) were left off the map for legibility; the rule list on this page is more complete.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P56074-B21⁩ and S2L70C are incompatible. با ⁦GPU⁩ مدل ⁦L40S⁩ کیت کابل ⁦x16/x16/x16⁩ ثانویه (⁦P56074-B21⁩) قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P56075-B21⁩ and S2L70C are incompatible. با بسته ⁦EDSFF⁩ روی مدل ⁦12EDSFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P56076-B21⁩ and S2L70C are incompatible. با بسته ⁦EDSFF⁩ روی مدل ⁦12EDSFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P48809-B21⁩ and S2L70C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48815-B21⁩ and S2L70C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P48816-B21⁩ and S2L70C are incompatible. ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P52533-B21⁩ and S2L70C are incompatible. جدول ⁦GPU Information⁩ برای ⁦GPU⁩ مدل ⁦L40S⁩ روی مدل‌های ⁦12LFF⁩ و ⁦24SFF⁩ «⁦Not Supported⁩» می‌گوید؛ این ⁦GPU⁩ روی آن‌ها قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P52535-B21⁩ and S2L70C are incompatible. جدول ⁦GPU Information⁩ برای ⁦GPU⁩ مدل ⁦L40S⁩ روی مدل‌های ⁦12LFF⁩ و ⁦24SFF⁩ «⁦Not Supported⁩» می‌گوید؛ این ⁦GPU⁩ روی آن‌ها قابل انتخاب نیست. (⁦FA⁩)
  • Requires: S2L70C requires ⁦P52535-B21⁩. ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)
  • Requires: S2L70C requires ⁦P48804-B21⁩. L40S cannot use the Primary riser; with a 2SFF Primary/Secondary cage (which requires the x8/x16/x8 Secondary riser) a double-wide GPU cannot use the Secondary riser either, so each L40S needs the Tertiary riser.
  • Requires: S2L70C requires ⁦P48804-B21⁩. برای ⁦GPU⁩ مدل ⁦L40S⁩ دست‌کم یک رایزر ثانویه یا ثالثیه لازم است (با دو ⁦GPU⁩ هر دو رایزر؛ رایزرهای ⁦NEBS⁩ با ⁦GPU⁩ سازگار نیستند). (⁦FA⁩)
  • Requires: S2L70C requires ⁦P48804-B21⁩. با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثالثیه ⁦P48804-B21⁩). (⁦FA⁩)
  • Requires: S2L70C requires ⁦P56072-B21⁩. این ⁦GPU⁩ دوعرضه به یک کیت کابل برق ⁦GPU⁩ دوعرضه (⁦P56072-B21⁩) نیاز دارد. (⁦FA⁩)
  • Requires: S2L70C requires ⁦P74792-B21⁩. ⁦GPU⁩ مدل ⁦L40S⁩ به هیت‌سینک ⁦2U High Performance⁩ (⁦P74792-B21⁩) یا ماژول ⁦DLC⁩ نیاز دارد. (⁦FA⁩)
  • Requires: S2L70C requires ⁦P74204-B21⁩. ⁦GPU⁩ مدل ⁦L40S⁩ به هیت‌سینک ⁦2U High Performance⁩ (⁦P74792-B21⁩) یا ماژول ⁦DLC⁩ نیاز دارد. (⁦FA⁩)
  • Requires: S2L70C requires ⁦P74208-B21⁩. ⁦GPU⁩ مدل ⁦L40S⁩ به هیت‌سینک ⁦2U High Performance⁩ (⁦P74792-B21⁩) یا ماژول ⁦DLC⁩ نیاز دارد. (⁦FA⁩)
  • Requires: S2L70C requires ⁦P51083-B21⁩. برای ⁦GPU⁩ مدل ⁦L40S⁩ دست‌کم یک رایزر ثانویه یا ثالثیه لازم است (با دو ⁦GPU⁩ هر دو رایزر؛ رایزرهای ⁦NEBS⁩ با ⁦GPU⁩ سازگار نیستند). (⁦FA⁩)
  • Requires: S2L70C requires ⁦P51083-B21⁩. با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثانویه). (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Graphics accelerators»Maximum quantity: 3Add to this model's configuration

Related rules (4)

  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ دوعرضه به یک کیت کابل برق ⁦GPU⁩ دوعرضه (⁦P56072-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P56072-B21

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • RequirementThis part is the condition of the rule

    ⁦GPU⁩ مدل ⁦L40S⁩ به هیت‌سینک ⁦2U High Performance⁩ (⁦P74792-B21⁩) یا ماژول ⁦DLC⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P74792-B21P74204-B21P74208-B21

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    2U High Performance Heat Sink (P74792-B21) OR DLC Module must be selected
  • WarningThe rule applies only when this part is selected

    تعداد مجاز ⁦GPU⁩ به اسلات‌های ⁦PCIe⁩ و قوانین حرارتی بستگی دارد؛ ⁦GPU⁩های دوعرضه ۲ اسلات اشغال می‌کنند و باید در ⁦OCA⁩ اعتبارسنجی شود. (⁦FA⁩)

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slot 4 and 5 or Tertiary Riser Slot 7 and 8)
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    GPU and rear drive options cannot be selected together.

HPE ProLiant DL380 Gen11

step «Graphics accelerators»Maximum quantity: 2Add to this model's configuration

Related rules (26)

  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ مدل ⁦L40S⁩ نیازمند کیت کابل برق ⁦GPU 2U⁩ (⁦DL380/DL560 Gen11⁩) است که در جدول‌های این سند با شماره قطعه مشخص نشده است. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If this GPU is selected, then HPE ProLiant DL380/DL560 Gen11 2U GPU Power Cable Kit must be selected and defaulted.
  • IncompatibilityThis part is one side of an incompatibility

    با ⁦GPU⁩ مدل ⁦L40S⁩ کیت کابل ⁦x16/x16/x16⁩ ثانویه (⁦P56074-B21⁩) قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P56074-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If this GPU is selected then Secondary 3x16 cable cannot be selected.
  • RequirementThis part is the condition of the rule

    برای ⁦GPU⁩ مدل ⁦L40S⁩ دست‌کم یک رایزر ثانویه یا ثالثیه لازم است (با دو ⁦GPU⁩ هر دو رایزر؛ رایزرهای ⁦NEBS⁩ با ⁦GPU⁩ سازگار نیستند). (⁦FA⁩)

    Parts on the other side: P51083-B21P48802-B21P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • IncompatibilityThis part is one side of an incompatibility

    با بسته ⁦EDSFF⁩ روی مدل ⁦12EDSFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P56075-B21P56076-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, If EDSFF Bundle is selected then this GPU cannot be selected.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦8LFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ بدون مؤلفه ⁦DLC⁩ پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: P62023-B21P62029-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8LFF CTO Server, If NO DLC component is selected then this GPU is not supported.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦8LFF⁩ با ⁦DLC⁩ حداکثر یک ⁦GPU⁩ مدل ⁦L40S⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8LFF CTO Server, If DLC component is selected then Max 1 GPU can be selected per sever.
  • WarningThe rule applies only when this part is selected

    ⁦GPU⁩ دو‌اسلاتی اسلات ⁦x16⁩ بالایی رایزر را اشغال می‌کند و روی بعضی رایزرها (با قفسه ⁦2SFF⁩) قابل نصب نیست. (برای ⁦A16⁩، ⁦H100 NVL⁩ و ⁦Intel Max 1100⁩ استنباطی است). (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space.
  • Maximum quantityThe rule limits this part

    کیت‌های کابل ⁦Primary/Secondary 3x16⁩ با ۲ یا ۳ ⁦GPU⁩ دوبل‌ویدث بدون رایزر ⁦Tertiary⁩ قابل انتخاب نیستند؛ بدون رایزر ⁦Tertiary⁩ (⁦P48804-B21⁩) حداکثر ۱ ⁦GPU⁩ دوبل‌ویدث مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty 2 or 3 of DW GPU is selected with no tertiary riser, then primary 3 x16 riser cable and secondary 3 x16 Riser Cable cannot be selected.
  • IncompatibilityThis part is one side of an incompatibility

    ⁦GPU⁩های تمام‌طول دو‌اسلاتی (⁦L40S⁩، ⁦L40⁩، ⁦H100⁩) و قفسه ⁦mid-tray⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48809-B21P48815-B21P48816-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    Full Length (FL) PCIe Card and Mid Tray cannot be selected together.
  • RequirementThis part is the condition of the rule

    با ⁦GPU⁩ تمام‌طول (⁦FL⁩) برای پردازنده‌ها هیت‌سینک ⁦High-performance⁩ یا ماژول ⁦DLC⁩ الزامی است. (⁦FA⁩)

    Parts on the other side: P48818-B21P48905-B21P62023-B21P62029-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected then High-Performance HS or DLC must be selected for Processors.
  • RequirementThe rule applies only when this part is selected

    با پردازنده‌های ⁦8593Q⁩ و ⁦6558Q⁩ اگر ⁦GPU⁩ تمام‌طول (⁦FL⁩) انتخاب شود، ماژول ⁦DLC⁩ باید برای پردازنده‌ها انتخاب شود. (⁦FA⁩)

    Parts on the other side: P68449-B21P67098-B21

    Source: a50004307enw — page 32
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 32View documentVendor siteSearch this document
    If Full Length (FL) GPU is selected with this Processor then DLC Module must be selected for Processors.
  • RequirementThis part is the condition of the rule

    با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثانویه). (⁦FA⁩)

    Parts on the other side: P51083-B21P48802-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • RequirementThis part is the condition of the rule

    با دو ⁦GPU⁩ مدل ⁦L40S⁩ رایزر ثانویه و رایزر ثالثیه هر دو لازم است (رایزر ثالثیه ⁦P48804-B21⁩). (⁦FA⁩)

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦8LFF⁩ با ⁦GPU⁩ مدل ⁦L40S⁩ و ماژول ⁦DLC⁩، رایزر ثالثیه باید انتخاب شود (⁦GPU⁩ روی رایزر ثالثیه نصب می‌شود). (⁦FA⁩)

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦8SFF⁩ با دو قفسه ⁦8SFF⁩ جلو، ⁦GPU⁩ مدل ⁦L40S⁩ با ماژول ⁦DLC⁩ نیازمند رایزر ثالثیه است. (⁦FA⁩)

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦12EDSFF⁩ با یک قفسه ⁦8SFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ با ماژول ⁦DLC⁩ نیازمند رایزر ثالثیه است. (⁦FA⁩)

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦8SFF⁩: با یک قفسه ⁦8SFF⁩ جلو حداکثر ۲ ⁦GPU⁩ مدل ⁦L40S⁩؛ با دو قفسه حداکثر ۱ (و فقط همراه ⁦DLC⁩)؛ با سه قفسه ⁦L40S⁩ قابل انتخاب نیست. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF CTO Server, If Qty1 of 8SFF Front cage is selected then Max of 2 GPU can be selected per Server.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF CTO Server, If Qty2 of 8SFF Front cage is selected with DLC Component then Max 1 GPU can be selected per sever.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦8SFF⁩ با دو قفسه ⁦8SFF⁩ جلو، ⁦GPU⁩ مدل ⁦L40S⁩ بدون کیت ⁦DLC⁩ پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: P62023-B21P62029-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF CTO Server, If Qty2 of 8SFF Front cage is selected with NO DLC Component then this GPU is not supported.
  • Maximum quantityThe rule limits this part

    روی مدل ⁦12EDSFF⁩ بدون قفسه اضافی حداکثر ۲ ⁦GPU⁩ مدل ⁦L40S⁩؛ با یک قفسه ⁦8SFF⁩ اضافی و ⁦DLC⁩ حداکثر ۱. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if no additional cage is selected then Max of 2 GPU can be selected per Server.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 1 GPU can be selected per sever.
  • RequirementThis part is the condition of the rule

    روی مدل ⁦12EDSFF⁩ با قفسه اضافی، ⁦GPU⁩ مدل ⁦L40S⁩ بدون کیت ⁦DLC⁩ پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: P62023-B21P62029-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if additional cage is selected with NO DLC Component then this GPU is not supported
  • IncompatibilityThis part is one side of an incompatibility

    جدول ⁦GPU Information⁩ برای ⁦GPU⁩ مدل ⁦L40S⁩ روی مدل‌های ⁦12LFF⁩ و ⁦24SFF⁩ «⁦Not Supported⁩» می‌گوید؛ این ⁦GPU⁩ روی آن‌ها قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P52533-B21P52535-B21

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    S2L70C NVIDIA L40S 48GB PCIe 1 or 2 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • RequirementThis part is the condition of the rule

    L40S cannot use the Primary riser; with a 2SFF Primary/Secondary cage (which requires the x8/x16/x8 Secondary riser) a double-wide GPU cannot use the Secondary riser either, so each L40S needs the Tertiary riser.

    Parts on the other side: P48804-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    This GPU cannot be populated on primary Riser.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
  • Maximum quantityThe rule limits this part

    L40S cannot be populated on the Primary riser: L40S qty <= number of Secondary/Tertiary risers.

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    This GPU cannot be populated on primary Riser.
    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    If Qty1 of this GPU is selected then Secondary OR Tertiary Riser Must be selected. If Qty2 of this GPU is selected then Secondary AND Tertiary Riser Must be selected.
  • WarningThe rule applies only when this part is selected

    Some GPU Information table entries for this GPU apply only 'if CPU <= 185 W'; the selected CPU is above 185 W.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    3@30 C (Air) if Max 1100
  • RequirementA general rule that covers this part through its attributes

    ⁦GPU⁩ نیازمند کیت فن ⁦High-performance⁩ (⁦P48820-B21⁩) است (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8SFF/ 8LFF/ 12LFF/ 12EDSFF CTO Server, If GPU is selected then High-Performance Fan Kit must be selected and defaulted.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    Requires selection of High-Performance Fan Kit.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و رایزر ⁦NEBS⁩ همزمان قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P48805-B21P48806-B21

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    GPU and NEBS Riser cannot be selected together.

Official notes (verbatim QuickSpecs text)

  • Maximum quantity 3 (subject to PCIe slot/thermal rules).
  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slot 4 and 5 or Tertiary Riser Slot 7 and 8)
  • 2U High Performance Heat Sink (P74792-B21) OR DLC Module must be selected
  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • Maximum ambient temperature support = 30C (subject to PCIe slot/quantity rules).
  • Max = 3.
  • Must be populated in x16 slot.
  • If Qty 2 or 3 of DW GPU is selected with no tertiary riser, then primary 3 x16 riser cable and secondary 3 x16 Riser Cable cannot be selected. Thermal constraints are based on Ambient Temp 25C.
  • Mixing of GPU types is not allowed.
  • For 8SFF/ 8LFF/ 12LFF/ 12EDSFF CTO Server, If GPU is selected then High-Performance Fan Kit must be selected and defaulted.
  • For 8SFF CTO Server, If Qty3 of 8SFF Front cage is selected then this GPU cannot be selected.
  • For best performance across common workloads, HPE recommends system main memory at least twice the memory of all GPU.
  • If doublewide GPU is selected on this riser, then the top x16 PCIe slot (FH FL) connector on this riser kit cannot be utilized as the doublewide GPU occupies this space. The “PCIe Card Capacity Limits” must account for this limitation.
  • If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
  • If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • Full Length (FL) PCIe Card and Mid Tray cannot be selected together.
  • For 12EDSFF CTO Server, If EDSFF Bundle is selected then this GPU cannot be selected.
  • If this GPU is selected, then HPE ProLiant DL380/DL560 Gen11 2U GPU Power Cable Kit must be selected and defaulted.
  • For 8SFF CTO Server, If Qty1 of 8SFF Front cage is selected then Max of 2 GPU can be selected per Server.
  • For 12EDSFF CTO Server, if no additional cage is selected then Max of 2 GPU can be selected per Server.
  • For 8SFF CTO Server, If Qty2 of 8SFF Front cage is selected with NO DLC Component then this GPU is not supported.
  • For 12EDSFF CTO Server, if additional cage is selected with NO DLC Component then this GPU is not supported
  • For 8LFF CTO Server, If NO DLC component is selected then this GPU is not supported.
  • For 8SFF CTO Server, If Qty2 of 8SFF Front cage is selected with DLC Component then Max 1 GPU can be selected per sever.
  • For 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 1 GPU can be selected per sever.
  • For 8LFF CTO Server, If DLC component is selected then Max 1 GPU can be selected per sever.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: NVIDIA L40S 48GB PCIE ACCELERATOR

Document row: a00073551enw — page 59
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
NVIDIA L40S 48GB PCIe Accelerator S2L70C

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.