Kimia Shop
FAEN

P27090-B21

Riser

HPE ProLiant DL380 Gen10 Plus 2-port 4NVMe x16 SlimSAS Primary Riser Kit

Verified in 1 active model(s): HPE ProLiant DL380 Gen10 Plus

Description

Primary riser

The primary riser provides the PCIe slots connected to the first processor.

The first expansion cards, such as a PCIe controller and a network card, are installed on this riser.

The slots are available without needing the second processor.

This text is the general explanation of this category of part (not a claim about one specific model).

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P27090-B21S2D86CR9S41CS0K90CP19359-B21P20616-B21P20618-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: S2D86C requires ⁦P27090-B21⁩. این ⁦GPU⁩ به یکی از رایزرهای اصلی ⁦P14599-B21⁩، ⁦P14592-B21⁩ یا ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: R9S41C requires ⁦P27090-B21⁩. این ⁦GPU⁩ به یکی از رایزرهای اصلی ⁦P14599-B21⁩، ⁦P14592-B21⁩ یا ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: S0K90C requires ⁦P27090-B21⁩. این ⁦GPU⁩ به یکی از رایزرهای اصلی ⁦P14599-B21⁩، ⁦P14592-B21⁩ یا ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P19359-B21⁩ requires ⁦P27090-B21⁩. باندل ⁦P19359-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P20616-B21⁩ requires ⁦P27090-B21⁩. باندل ⁦P20616-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P20618-B21⁩ requires ⁦P27090-B21⁩. باندل ⁦P20618-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10 Plus

step «Risers and PCIe expansion»Add to this model's configuration

Related rules (10)

  • Maximum quantityThe rule limits this part

    حداکثر یک رایزر اصلی (⁦Primary⁩) در هر سرور مجاز است. (⁦FA⁩)

    Source: a50002553enw — page 40
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 40View documentVendor siteSearch this document
    Since this option is part of the Riser assembly, it must be classified as a Primary Riser and Max Qty=1 PRIMARY Risers is allowed per server.
    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • Maximum quantityThe rule limits this part

    با ۲ عدد ⁦P26920-B21⁩ هیچ رایزر اصلی/ثانویه‌ی دیگری مجاز نیست. (⁦FA⁩)

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    If Qty 2 are selected then it will be installed into both Primary Riser and Secondary Riser location. No other Primary Riser and Secondary Riser are allowed.
  • IncompatibilityThe rule applies only when this part is selected

    وقتی ⁦P26920-B21⁩ کنار رایزر اصلی دیگر قرار گیرد نقش رایزر ثانویه را دارد؛ رایزر ثانویه‌ی دیگر مجاز نیست. (⁦FA⁩)

    Parts on the other side: P26920-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    If other Primary Riser is selected along with it, then it will be considered as Secondary Riser and vice-versa (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • IncompatibilityThe rule applies only when this part is selected

    در این حالت رایزر سوم (به‌جز ⁦P27093-B21⁩) قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: P26920-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    Tertiary Riser cannot be selected (Except Tertiary 2P NVMe Riser (P27093-B21))
  • RequirementThe rule applies only when this part is selected

    در این حالت پردازنده‌ی دوم باید انتخاب شود. (⁦FA⁩)

    Parts on the other side: P26920-B21

    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    Second Processor must be selected
  • RequirementThis part can satisfy the requirement of the rule

    این ⁦GPU⁩ به یکی از رایزرهای اصلی ⁦P14599-B21⁩، ⁦P14592-B21⁩ یا ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: S2D86CR9S41CS0K90C

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If Qty1 of H100 GPU is selected then any one of below Primary Riser must be selected.
    Source: a50002553enw — page 58
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 58View documentVendor siteSearch this document
    If Qty1 L40 GPU is selected then any one of below Primary Riser must be selected.
  • RequirementThis part can satisfy the requirement of the rule

    باندل ⁦P19359-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P19359-B21

    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    HPE ProLiant DL380 Gen10 Plus 24NVMe Balanced FIO Bundle Kit P19359-B21 Notes: If this option is selected, then following items must be selected in the config:
    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    Qty 1 of HPE DL380 Gen10 Plus x16 2pt 4SFF NVMe Primary Riser (P27090-B21)
  • RequirementThis part can satisfy the requirement of the rule

    باندل ⁦P20616-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P20616-B21

    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    HPE ProLiant DL380 Gen10 Plus 8NVMe 1P Balanced FIO Bundle Kit P20616-B21 Notes: If this option is selected, then following items must be selected in the config:
    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    Qty 1 of HPE DL380 Gen10 Plus x16 2pt 4SFF NVMe Primary Riser (P27090-B21)
  • RequirementThis part can satisfy the requirement of the rule

    باندل ⁦P20618-B21⁩ به رایزر ⁦P27090-B21⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P20618-B21

    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    HPE ProLiant DL380 Gen10 Plus 12NVMe 1P Balanced FIO Bundle Kit P20618-B21 Notes: If this option is selected, then following items must be selected in the config:
    Source: a50002553enw — page 34
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 34View documentVendor siteSearch this document
    Qty 1 of HPE DL380 Gen10 Plus x16 2pt 4SFF NVMe Primary Riser (P27090-B21)
  • Maximum quantityThe rule limits this part

    Only two primary/secondary riser positions: rear 2SFF cages (P55696, P26920) + the primary-riser-position 2LFF cage (P55518) + primary/secondary risers ≤ 2.

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    2SFF Rear Cage (Primary/ Secondary Riser position)
    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN10 PLUS 2-PORT 4NVME X16 SLIMSAS PRIMARY RISER KIT

Document row: a50002553enw — page 52
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 52View documentVendor siteSearch this document
HPE ProLiant DL380 Gen10 Plus 2-port 4NVMe x16 SlimSAS Primary Riser Kit P27090-B21
Document row: a50002553enw — page 53
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 53View documentVendor siteSearch this document
P27090-B21 HPE DL380 Gen10 Plus 2p x16 SlimSAS Prim Kit O N N - x16 - 2 4

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.