Kimia Shop
FAEN

P52532-B21

Base model

HPE ProLiant DL380 Gen11 8LFF NC CTO Server

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Description

Base with LFF cage (3.5-inch drives)

A chassis with LFF (Large Form Factor) front bays for 3.5-inch drives, which have the highest capacity per drive.

For bulk storage, backup, archive and video, where capacity matters more than IOPS, LFF lowers the cost per terabyte.

High raw capacity is reached with fewer drives and less power per terabyte.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

LFF bays
8

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Base Configuration»Add to this model's configuration

Related rules (8)

  • RequirementThe rule applies only when this part is selected

    روی مدل ⁦8LFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ بدون مؤلفه ⁦DLC⁩ پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8LFF CTO Server, If NO DLC component is selected then this GPU is not supported.
  • Maximum quantityThe rule applies only when this part is selected

    روی مدل ⁦8LFF⁩ با ⁦DLC⁩ حداکثر یک ⁦GPU⁩ مدل ⁦L40S⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 8LFF CTO Server, If DLC component is selected then Max 1 GPU can be selected per sever.
  • Maximum quantityThe rule applies only when this part is selected

    روی مدل ⁦8LFF⁩ حداکثر ۲ ⁦GPU⁩ مدل ⁦L40⁩ بدون ⁦DLC⁩ و ۳ عدد با ⁦DLC⁩ مجاز است. (⁦FA⁩)

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8LFF CTO Server, if NO DLC component is selected then Max of 2 GPU can be selected per Server.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 8LFF CTO Server, if DLC component is selected then Max of 3 GPU can be selected per Server.
  • RequirementThe rule applies only when this part is selected

    پردازنده‌های نسل ۵ با ⁦TDP⁩ حداکثر ⁦205⁩ وات روی مدل‌های ⁦8SFF⁩، ⁦8LFF⁩، ⁦12LFF⁩ (۴ فن استاندارد) و ⁦12EDSFF⁩ نیازمند کیت فن استاندارد (⁦P49146-B21⁩) یا ⁦High-performance⁩ (⁦P48820-B21⁩) هستند؛ روی ⁦12EDSFF⁩ کیت استاندارد پشتیبانی نمی‌شود و عملاً کیت ⁦High-performance⁩ لازم است. (⁦FA⁩)

    Parts on the other side: P67079-B21P67080-B21P67083-B21P67090-B21P67091-B21P67092-B21P67093-B21P67094-B21P67100-B21P67104-B21

    Source: a50004307enw — page 35
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 35View documentVendor siteSearch this document
    Standard Fan kit or High-performance Fan Kit must be selected.
    Source: a50004307enw — page 37
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 37View documentVendor siteSearch this document
    Standard Fan kit or High-performance Fan Kit must be selected.
  • RequirementThe rule applies only when this part is selected

    روی مدل ⁦8LFF⁩ با ⁦GPU⁩ مدل ⁦L40S⁩ و ماژول ⁦DLC⁩، رایزر ثالثیه باید انتخاب شود (⁦GPU⁩ روی رایزر ثالثیه نصب می‌شود). (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • Maximum quantityThe rule applies only when this part is selected

    GPU Information table, 16SFF/8LFF column for H100 80GB: only '2 @ 20 C (Air)' and '2 @ 25 C (DLC)'; 3 cards is not listed (same convention as the L40 8LFF note).

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    R9S41C NVIDIA H100 80GB PCIe 2 or 3 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • RequirementThe rule applies only when this part is selected

    8LFF: H100 '2 @ 20 C (Air)' vs '2 @ 25 C (DLC)' (the L40S notes are stricter for the same cells). Air cooling of 2 cards needs ambient <= 20 C.

    Parts on the other side: R9S41C

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    R9S41C NVIDIA H100 80GB PCIe 2 or 3 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • WarningThe rule applies only when this part is selected

    QuickSpecs lists 8LFF with up to 4LFF rear OR 2SFF rear; confirm a rear 2SFF + rear 2LFF combination with HPE.

    Source: a50004307enw — page 6
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 6View documentVendor siteSearch this document
    8LFF supporting 2SFF front, and up to 4LFF rear or 2SFF rear drive bay options

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN11 8LFF NC CONFIGURE-TO-ORDER SERVER

Document row: a50004307enw — page 29
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 29View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 8LFF NC CTO Server SKU Number P52532-B21
Document row: a50004307enw — page 29
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 29View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 8LFF NC CTO Server TAA SKU* P52532-B21#GTA

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.