Kimia Shop
FAEN

16 x 2.5" (SAS4/SATA) Smart Flow

Base model

Dell option (no published part number)

Internal storage configuration: 16 x 2.5" (SAS4/SATA) Smart Flow

Verified in 1 active model(s): Dell PowerEdge R760

Description

Base with SFF cage (2.5-inch drives)

A chassis with SFF (Small Form Factor) front bays that accepts 2.5-inch HDDs, SSDs and, with a suitable backplane, NVMe drives.

SFF provides more drive density in the same chassis height and is better suited to IOPS-sensitive workloads.

It allows arrays with more drives, higher random performance and a mix of SSD and HDD.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

SFF bays
16
LFF bays
0
EDSFF bays
0
SAS/SATA bays
16
NVMe bays
0

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

16 x 2.5" (SAS4/SATA) Smart FlowHBA355iPERC H355PERC H755PERC H965i

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: 16 x 2.5" (SAS4/SATA) Smart Flow requires HBA355i. Per Dell's cable-routing tables this storage configuration needs one of: HBA355i, PERC H355, PERC H755, PERC H965i.
  • Requires: 16 x 2.5" (SAS4/SATA) Smart Flow requires PERC H355. Per Dell's cable-routing tables this storage configuration needs one of: HBA355i, PERC H355, PERC H755, PERC H965i.
  • Requires: 16 x 2.5" (SAS4/SATA) Smart Flow requires PERC H755. Per Dell's cable-routing tables this storage configuration needs one of: HBA355i, PERC H355, PERC H755, PERC H965i.
  • Requires: 16 x 2.5" (SAS4/SATA) Smart Flow requires PERC H965i. Per Dell's cable-routing tables this storage configuration needs one of: HBA355i, PERC H355, PERC H755, PERC H965i.

Active models in which this part is listed

Dell PowerEdge R760

step «Chassis / storage configuration»Add to this model's configuration

Related rules (4)

  • IncompatibilityThe rule applies only when this part is selected

    With 2.5-inch drives the documented range of the 2U HPR heat sink is 165 W-350 W.

    Parts on the other side: 2U HPR HSK

    Source: dell-r760-tg — page 72
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 72View documentSearch this document
    2U HPR HSK 125 W–250 W (supports 3.5-inch drives and non-GPU configuration) 165 W–350 W (supports 2.5-inch drives and non-GPU configuration)
  • RequirementThis part is the condition of the rule

    Per Dell's cable-routing tables this storage configuration needs one of: HBA355i, PERC H355, PERC H755, PERC H965i.

    Parts on the other side: HBA355iPERC H355PERC H755PERC H965i

    Source: dell-r760-ism — page 166
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 166View documentSearch this document
    Table 104. 16 x 2.5-inch SAS/SATA with fPERC (HBA355i, H355, H755)
    Source: dell-r760-ism — page 167
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 167View documentSearch this document
    Table 105. 16 x 2.5-inch SAS/SATA with fPERC (H965i)
  • Maximum quantityThe rule applies only when this part is selected

    Dell's cable-routing tables for this storage configuration route one front PERC (fPERC) only: at most one internal storage controller (two only on the dual-controller and 16 x 2.5-inch NVMe RAID configurations).

    Source: dell-r760-ism — page 181
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 181View documentSearch this document
    Table 120. 24 x 2.5-inch SAS/SATA with fPERC (HBA355i, H355, H755)
    Source: dell-r760-ism — page 172
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 172View documentSearch this document
    Table 111. 24 x 2.5-inch SAS/SATA with fPERC (H965i)
  • IncompatibilityThe rule applies only when this part is selected

    Riser configuration 8 supports the PERC Adapter only, while this storage configuration's cable tables use front PERCs (fPERC) only.

    Parts on the other side: R1B+R2A

    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    Table 14. PCIe Riser Configurations Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
    Source: dell-r760-tg — page 35
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 35View documentSearch this document
    8 R1B+R2A 1 PERC Adapter No

Verification and sources

Verified against this option's row in Dell's official documents; Dell publishes no part number for it - the orderable SKU and price come from a Dell quote.

Document row: dell-r760-tg — page 22
Dell PowerEdge R760 Technical Guide
“dell-r760-tg” — page 22View documentSearch this document
16 x 2.5" (SAS4/SATA) Smart Flow

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.