Kimia Shop
FAEN

P52536-B21

Base model

HPE ProLiant DL380 Gen11 12EDSFF NC Configure-to-order Server

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Description

Base with NVMe cage

A chassis whose front bays are connected to PCIe lanes through a dedicated NVMe backplane and accept NVMe SSDs directly (Direct) or through an NVMe-capable RAID controller (the allowed controller type depends on the vendor and server model).

NVMe has the lowest latency and highest bandwidth of the storage interfaces and suits high-transaction databases and software-defined storage.

Removing the SAS/SATA layer and talking directly to the processor greatly increases IOPS and reduces latency.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

EDSFF bays
12

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P52536-B21P67109-B21P67102-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P52536-B21⁩ and ⁦P67109-B21⁩ are incompatible. پردازنده‌های ⁦8581V⁩ و ⁦8558U⁩ با سرور ⁦CTO⁩ مدل ⁦12EDSFF⁩ قابل انتخاب نیستند. (⁦FA⁩)
  • Incompatible: ⁦P52536-B21⁩ and ⁦P67102-B21⁩ are incompatible. پردازنده‌های ⁦8581V⁩ و ⁦8558U⁩ با سرور ⁦CTO⁩ مدل ⁦12EDSFF⁩ قابل انتخاب نیستند. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Base Configuration»Add to this model's configuration

Related rules (9)

  • IncompatibilityThis part is one side of an incompatibility

    پردازنده‌های ⁦8581V⁩ و ⁦8558U⁩ با سرور ⁦CTO⁩ مدل ⁦12EDSFF⁩ قابل انتخاب نیستند. (⁦FA⁩)

    Parts on the other side: P67109-B21P67102-B21

    Source: a50004307enw — page 32
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 32View documentVendor siteSearch this document
    Cannot be selected with EDSFF CTO Server.
    Source: a50004307enw — page 34
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 34View documentVendor siteSearch this document
    Cannot be selected with EDSFF CTO Server.
  • RequirementThe rule applies only when this part is selected

    پردازنده‌های نسل ۵ با ⁦TDP⁩ حداکثر ⁦205⁩ وات روی مدل‌های ⁦8SFF⁩، ⁦8LFF⁩، ⁦12LFF⁩ (۴ فن استاندارد) و ⁦12EDSFF⁩ نیازمند کیت فن استاندارد (⁦P49146-B21⁩) یا ⁦High-performance⁩ (⁦P48820-B21⁩) هستند؛ روی ⁦12EDSFF⁩ کیت استاندارد پشتیبانی نمی‌شود و عملاً کیت ⁦High-performance⁩ لازم است. (⁦FA⁩)

    Parts on the other side: P67079-B21P67080-B21P67083-B21P67090-B21P67091-B21P67092-B21P67093-B21P67094-B21P67100-B21P67104-B21

    Source: a50004307enw — page 35
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 35View documentVendor siteSearch this document
    Standard Fan kit or High-performance Fan Kit must be selected.
    Source: a50004307enw — page 37
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 37View documentVendor siteSearch this document
    Standard Fan kit or High-performance Fan Kit must be selected.
  • RequirementThe rule applies only when this part is selected

    روی مدل ⁦12EDSFF⁩ با یک قفسه ⁦8SFF⁩، ⁦GPU⁩ مدل ⁦L40S⁩ با ماژول ⁦DLC⁩ نیازمند رایزر ثالثیه است. (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    For 8SFF CTO Server with two 8SFF cages/ 8LFF CTO Server/ 12EDSFF Server with one 8SFF Cage, If Qty1 this GPU is selected with DLC Module then Tertiary Riser must be selected.
  • Maximum quantityThe rule applies only when this part is selected

    روی مدل ⁦12EDSFF⁩ بدون قفسه اضافی حداکثر ۲ ⁦GPU⁩ مدل ⁦L40S⁩؛ با یک قفسه ⁦8SFF⁩ اضافی و ⁦DLC⁩ حداکثر ۱. (⁦FA⁩)

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if no additional cage is selected then Max of 2 GPU can be selected per Server.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 1 GPU can be selected per sever.
  • RequirementThe rule applies only when this part is selected

    روی مدل ⁦12EDSFF⁩ با قفسه اضافی، ⁦GPU⁩ مدل ⁦L40S⁩ بدون کیت ⁦DLC⁩ پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: S2L70C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    For 12EDSFF CTO Server, if additional cage is selected with NO DLC Component then this GPU is not supported
  • RequirementThe rule applies only when this part is selected

    12EDSFF CTO with one additional 8SFF cage: max 2 L40 without DLC, max 3 with DLC (DLC needed >= L40 + 8SFF cages - 3).

    Parts on the other side: S0K90CP48813-B21P48814-B21

    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12EDSFF CTO Server, if one additional 8SFF cage is selected without DLC Component then Max 2 GPU can be selected per sever.
    Source: a50004307enw — page 66
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 66View documentVendor siteSearch this document
    On 12EDSFF CTO Server, if one additional 8SFF cage is selected with DLC Component then Max 3 GPU can be selected per sever.
  • RequirementThe rule applies only when this part is selected

    12EDSFF: the GPU Information table has no 12EDSFF column. 3 x H100 without DLC is not listed; expert check needed.

    Parts on the other side: R9S41C

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    R9S41C NVIDIA H100 80GB PCIe 2 or 3 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • RequirementThe rule applies only when this part is selected

    12EDSFF: the GPU Information table has no 12EDSFF column. 2 x H100 on air is listed only for 8SFF ('2@25 C (Air)') and 16SFF/8LFF ('2 @ 20 C (Air)'); without DLC, expert check needed.

    Parts on the other side: R9S41C

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    R9S41C NVIDIA H100 80GB PCIe 2 or 3 Gen5 2@25 C (Air) 2 @ 20 C (Air) Not Supported
  • WarningThe rule applies only when this part is selected

    12EDSFF: the GPU Information table has no 12EDSFF column. Intel Data Center GPU Max 1100 is not listed for this chassis; expert check needed.

    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    Part Card Qty PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
    Source: a50004307enw — page 68
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 68View documentVendor siteSearch this document
    S1T66C Intel® Data Center GPU 2 or 3 Gen5 3@30 C(Air) 3@25 C (Air) Not Supported

Official notes (verbatim QuickSpecs text)

  • Parser note: the extracted row pairs P52536-B21 with the description '8LFF NC CTO Server'. On page 29 the column header of this SKU reads 'HPE ProLiant DL380 Gen11 12EDSFF NC Configure-to-order Server' (12 EDSFF drive cage, 6 standard fans). The catalog keeps the parsed row text; see conflicts[].

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN11 12EDSFF NC CONFIGURE-TO-ORDER SERVER

Document row: a50004307enw — page 29
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 29View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 12EDSFF NC Configure-to-order Server SKU Number P52536-B21
Document row: a50004307enw — page 29
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 29View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 12EDSFF NC Configure-to-order Server TAA SKU* P52536-B21#GTA

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.