Kimia Shop
FAEN

P55696-B21

Drive cage

HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA Primary Secondary Drive Cage Kit

Verified in 2 active model(s): HPE ProLiant DL380 Gen10 Plus, HPE ProLiant DL380 Gen10

Description

Rear drive cage

A rear cage creates extra drive bays at the back of the chassis, usually in place of one of the PCIe risers.

It is used to add boot drives or cache drives without taking front bays.

The chassis's maximum number of drives increases and the front bays stay available for data.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

SFF bays
2

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P55696-B21P14608-B21P26325-B21P26324-B21P26279-B21P06367-B21P12688-B21P04220-B21S2D86CR9S41CS0K90C

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦P55696-B21⁩ requires ⁦P14608-B21⁩. این قفسه به کیت فن ⁦Maximum Performance⁩ (⁦P14608-B21⁩) نیاز دارد (شاسی‌های ⁦12LFF⁩ و ⁦24SFF⁩ فن پرفورمنس استاندارد دارند). (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26325-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26325-B21⁩. قفسه/بک‌پلین ⁦BC⁩ به یک کنترلر ⁦Tri-mode⁩ (⁦MegaRAID⁩) نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26324-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26324-B21⁩. قفسه/بک‌پلین ⁦BC⁩ به یک کنترلر ⁦Tri-mode⁩ (⁦MegaRAID⁩) نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26279-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P26279-B21⁩. قفسه/بک‌پلین ⁦BC⁩ به یک کنترلر ⁦Tri-mode⁩ (⁦MegaRAID⁩) نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P06367-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P06367-B21⁩. قفسه/بک‌پلین ⁦BC⁩ به یک کنترلر ⁦Tri-mode⁩ (⁦MegaRAID⁩) نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P12688-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Requires: ⁦P55696-B21⁩ requires ⁦P04220-B21⁩. این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)
  • Incompatible: ⁦P55696-B21⁩ and S2D86C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P55696-B21⁩ and R9S41C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)
  • Incompatible: ⁦P55696-B21⁩ and S0K90C are incompatible. با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen10 Plus

step «Drive cages and bays»Maximum quantity: 2Add to this model's configuration

Related rules (6)

  • RequirementThis part is the condition of the rule

    این قفسه به کیت فن ⁦Maximum Performance⁩ (⁦P14608-B21⁩) نیاز دارد (شاسی‌های ⁦12LFF⁩ و ⁦24SFF⁩ فن پرفورمنس استاندارد دارند). (⁦FA⁩)

    Parts on the other side: P14608-B21

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    Requires selection of Max Performance Fan Kit (P14608-B21)
    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    Requires selection of Maximum Performance Fan Kit (P14608-B21)
  • RequirementThis part is the condition of the rule

    این قفسه به کنترلر ⁦Tri-Mode⁩ نیاز دارد. (⁦FA⁩)

    Parts on the other side: P26325-B21P26324-B21P26279-B21P06367-B21P12688-B21P04220-B21

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    Requires selection of tri-mode controller.
    Source: a50002553enw — page 39
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 39View documentVendor siteSearch this document
    Requires selection of tri-mode controller.
  • WarningThe rule applies only when this part is selected

    در جایگاه عقب، درایوها باید کمتر از ۱۰ وات باشند. (⁦FA⁩)

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    If used in rear position, then drives must be under 10W.
    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    When used in rear position then drives must be under 10W
  • Maximum quantityThe rule limits this part

    Only two primary/secondary riser positions: rear 2SFF cages (P55696, P26920) + the primary-riser-position 2LFF cage (P55518) + primary/secondary risers ≤ 2.

    Source: a50002553enw — page 38
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
    2SFF Rear Cage (Primary/ Secondary Riser position)
    Source: a50002553enw — page 41
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 41View documentVendor siteSearch this document
    (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server)
  • WarningThe rule applies only when this part is selected

    QuickSpecs lists 8LFF with up to 4LFF rear OR 6SFF rear; confirm a rear 2SFF + rear 2LFF combination with HPE.

    Source: a50002553enw — page 5
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 5View documentVendor siteSearch this document
    and up to 4LFF rear or 6SFF rear drive bay options
  • IncompatibilityA general rule that covers this part through its attributes

    با این ⁦GPU⁩ قفسه‌ی درایو عقب قابل انتخاب نیست. (⁦FA⁩)

    Parts on the other side: S2D86CR9S41CS0K90C

    Source: a50002553enw — page 56
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 56View documentVendor siteSearch this document
    If H100 GPU is selected then no rear drive cage can be selected.
    Source: a50002553enw — page 59
    HPE ProLiant DL380 Gen10 Plus Server
    “HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 59View documentVendor siteSearch this document
    If L40 GPU is selected then no rear drive cage can be selected.

HPE ProLiant DL380 Gen10

step «Drive bays and cages»Add to this model's configuration

Only with these base models: P56969-B21P56970-B21

Related rules (1)

  • RequirementThis part is the condition of the rule

    قفسه/بک‌پلین ⁦BC⁩ به یک کنترلر ⁦Tri-mode⁩ (⁦MegaRAID⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P06367-B21P26279-B21P26324-B21P26325-B21

    Source: a00008180enw — page 42
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 42View documentVendor siteSearch this document
    Supported only with the 8SFF Basic Carriers Model-X Requires selection of a tri-mode controller
    Source: a00008180enw — page 46
    HPE ProLiant DL380 Gen10 Server
    “HPE ProLiant DL380 Gen10 Server QuickSpecs” — a00008180enw · Version 77 — page 46View documentVendor siteSearch this document
    Broadcom MegaRAID controllers and Basic Carrier drives are only supported with HPE DL380 Gen10 NC 8SFF BC CTO Server (P56969-B21) and HPE DL380 Gen10 8SFF BC CTO Server (P56970-B21).

Official notes (verbatim QuickSpecs text)

  • Max = 2

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN10 PLUS 2SFF SAS/SATA PRIMARY SECONDARY DRIVE CAGE KIT

Document row: a50002553enw — page 38
HPE ProLiant DL380 Gen10 Plus Server
“HPE ProLiant DL380 Gen10 Plus Server QuickSpecs” — a50002553enw · Version 42 — page 38View documentVendor siteSearch this document
HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA Primary Secondary Drive Cage Kit P55696-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.