Kimia Shop
FAEN

S6A73C

Graphics card

NVIDIA RTX PRO 6000 Blackwell Server Edition 96GB PCIe Accelerator for HPE

Verified in 1 active model(s): HPE ProLiant DL380 Gen12

Documentation of this part

Verified documentation; every sentence refers to an official HPE document (press [number] to see the quote).

What it is

  • NVIDIA RTX PRO 6000 Blackwell Server Edition 96GB PCIe Accelerator for HPE S6A73C.

Features

  • Maximum quantity 3 (subject to PCIe slot/thermal rules).
  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slots 4 and 5 or Tertiary Riser Slot 7 and 8).
  • Supported with power capped at 450W.
  • Maximum ambient temperature support = 27C (subject to PCIe slot/quantity rules).
  • Available with SFF and EDSFF CTO server model.

Official notes

  • Please refer to the “Step 14: Ambient Temperature Support” section for the supported operating temperature range and any associated configuration restrictions.
  • Mixing of GPUs is not allowed
  • GPU and rear drive options cannot be selected together.
  • Maximum quantity 3 (subject to PCIe slot/thermal rules).
  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slots 4 and 5 or Tertiary Riser Slot 7 and 8)
  • Supported with power capped at 450W.
  • 1U High Performance Heat Sink (P74787-B21) and Cooling Upgrade Enablement Kit (P81130-B21) must be selected.
  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • Maximum ambient temperature support = 27C (subject to PCIe slot/quantity rules).
  • Available with SFF and EDSFF CTO server model.
  • Final configuration support must be validated in HPE One Config Advanced (OCA), which automatically applies applicable configuration and ambient-temperature rules.
  • Select the table that matches the processor TDP and cooling solution. Then locate the applicable front drive cage type, quantity, and location, followed by the GPU installation slot. The value shown is the maximum supported server ambient temperature for that GPU configuration.
  • After determining the value from this matrix, compare it with the limits from all other applicable Thermal Support Matrices and configuration rules. When multiple components or configuration rules have thermal restrictions, the lowest applicable maximum server ambient temperature determines the supported operating temperature of the complete server configuration.
  • Values shown are the maximum supported server ambient temperatures in °C for the applicable GPU configuration.
  • X = Not supported.
  • Configurations with three SFF or EDSFF front drive cages, and all LFF configurations (8LFF CTO and 12LFF CTO), are not supported with these GPUs.
  • The Universal Media Bay (UMB) and Multipurpose Drive Cage are not included in the front drive cage count because they have less impact on airflow.
  • For mixed front drive cage configurations, such as SFF plus EDSFF, use the EDSFF rule with the combined front drive cage quantity.

Compatibility & limits

  • 1U High Performance Heat Sink (P74787-B21) and Cooling Upgrade Enablement Kit (P81130-B21) must be selected.
  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • GPU and rear drive options cannot be selected together.

How it differs

  • S6A73C has a maximum quantity of 3, while S3U30C has a maximum quantity of 2 (both subject to PCIe slot/thermal rules).

Description

GPU / accelerator card

A GPU or PCIe accelerator card that takes heavy parallel processing off the CPU; it comes in single-wide or double-wide form.

It is essential for training and inference of AI models, rendering, VDI and scientific computing.

The processing time of these workloads drops to a fraction of the time on the CPU.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

Memory
96

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

S6A73CP79552-B21P73284-B21P73285-B21P74787-B21P81130-B21P56072-B21P74743-B21P74734-B21P74746-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: ⁦P79552-B21⁩ and S6A73C are incompatible. این ⁦GPU⁩ تا دمای محیط ۲۷ درجه پشتیبانی می‌شود و با ⁦SKU⁩ دمای محیط ۳۰ درجه (⁦P79552-B21⁩) سازگار نیست. (⁦FA⁩)
  • Incompatible: ⁦P73284-B21⁩ and S6A73C are incompatible. پیکربندی‌های ⁦LFF⁩ (مدل‌های ⁦8LFF⁩ و ⁦12LFF CTO⁩) با این ⁦GPU⁩های ۴۵۰ واتی پشتیبانی نمی‌شود. (⁦FA⁩)
  • Incompatible: ⁦P73285-B21⁩ and S6A73C are incompatible. پیکربندی‌های ⁦LFF⁩ (مدل‌های ⁦8LFF⁩ و ⁦12LFF CTO⁩) با این ⁦GPU⁩های ۴۵۰ واتی پشتیبانی نمی‌شود. (⁦FA⁩)
  • Requires: S6A73C requires ⁦P74787-B21⁩. این ⁦GPU⁩ به هیت‌سینک ⁦1U High Performance⁩ (⁦P74787-B21⁩) نیاز دارد. (⁦FA⁩)
  • Requires: S6A73C requires ⁦P81130-B21⁩. این ⁦GPU⁩ به کیت ⁦Cooling Upgrade⁩ (⁦P81130-B21⁩) نیاز دارد. (⁦FA⁩)
  • Requires: S6A73C requires ⁦P56072-B21⁩. این ⁦GPU⁩ دوعرضه به یک کیت کابل برق ⁦GPU⁩ دوعرضه (⁦P56072-B21⁩) نیاز دارد. (⁦FA⁩)
  • Incompatible: ⁦P74743-B21⁩ and S6A73C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)
  • Incompatible: ⁦P74734-B21⁩ and S6A73C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)
  • Incompatible: ⁦P74746-B21⁩ and S6A73C are incompatible. ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen12

step «Graphics accelerators»Maximum quantity: 3Add to this model's configuration

Only with these base models: P73282-B21P73286-B21

Related rules (9)

  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ به هیت‌سینک ⁦1U High Performance⁩ (⁦P74787-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P74787-B21

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    1U High Performance Heat Sink (P74787-B21) and Cooling Upgrade Enablement Kit (P81130-B21) must be selected.
  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ به کیت ⁦Cooling Upgrade⁩ (⁦P81130-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P81130-B21

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    1U High Performance Heat Sink (P74787-B21) and Cooling Upgrade Enablement Kit (P81130-B21) must be selected.
  • RequirementThis part is the condition of the rule

    این ⁦GPU⁩ دوعرضه به یک کیت کابل برق ⁦GPU⁩ دوعرضه (⁦P56072-B21⁩) نیاز دارد. (⁦FA⁩)

    Parts on the other side: P56072-B21

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • IncompatibilityThis part is one side of an incompatibility

    این ⁦GPU⁩ تا دمای محیط ۲۷ درجه پشتیبانی می‌شود و با ⁦SKU⁩ دمای محیط ۳۰ درجه (⁦P79552-B21⁩) سازگار نیست. (⁦FA⁩)

    Parts on the other side: P79552-B21

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    Maximum ambient temperature support = 27C (subject to PCIe slot/quantity rules).
  • WarningThe rule applies only when this part is selected

    توان ⁦GPU⁩های دوعرضه‌ی فهرست‌شده باید روی ۴۵۰ وات محدود (⁦power cap⁩) شود. (⁦FA⁩)

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    Supported with power capped at 450W.
  • WarningThe rule applies only when this part is selected

    تعداد مجاز ⁦GPU⁩ به اسلات‌های ⁦PCIe⁩ و قوانین حرارتی بستگی دارد؛ ⁦GPU⁩های دوعرضه ۲ اسلات اشغال می‌کنند و باید در ⁦OCA⁩ اعتبارسنجی شود. (⁦FA⁩)

    Source: a00073551enw — page 59
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 59View documentVendor siteSearch this document
    Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slot 4 and 5 or Tertiary Riser Slot 7 and 8)
  • Maximum quantityThe rule applies only when this part is selected

    با این ⁦GPU⁩های ۴۵۰ واتی، پیکربندی با سه قفسه‌ی جلوی ⁦SFF⁩ یا ⁦EDSFF⁩ پشتیبانی نمی‌شود (حداکثر دو قفسه؛ ⁦UMB⁩ و قفسه‌ی ⁦Multipurpose⁩ شمرده نمی‌شوند). (⁦FA⁩)

    Source: a00073551enw — page 78
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 78View documentVendor siteSearch this document
    Configurations with three SFF or EDSFF front drive cages, and all LFF configurations (8LFF CTO and 12LFF CTO), are not supported with these GPUs.
    Source: a00073551enw — page 78
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 78View documentVendor siteSearch this document
    The Universal Media Bay (UMB) and Multipurpose Drive Cage are not included in the front drive cage count because they have less impact on airflow.
  • IncompatibilityThis part is one side of an incompatibility

    پیکربندی‌های ⁦LFF⁩ (مدل‌های ⁦8LFF⁩ و ⁦12LFF CTO⁩) با این ⁦GPU⁩های ۴۵۰ واتی پشتیبانی نمی‌شود. (⁦FA⁩)

    Parts on the other side: P73284-B21P73285-B21

    Source: a00073551enw — page 78
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 78View documentVendor siteSearch this document
    Configurations with three SFF or EDSFF front drive cages, and all LFF configurations (8LFF CTO and 12LFF CTO), are not supported with these GPUs.
  • IncompatibilityA general rule that covers this part through its attributes

    ⁦GPU⁩ و گزینه‌های درایو عقب را نمی‌توان با هم انتخاب کرد. (⁦FA⁩)

    Source: a00073551enw — page 58
    HPE ProLiant Compute DL380 Gen12
    “HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
    GPU and rear drive options cannot be selected together.

Official notes (verbatim QuickSpecs text)

  • Maximum quantity 3 (subject to PCIe slot/thermal rules).
  • Occupies 2 PCIe Slots per GPU (Primary Riser Slot 1 and 2 or Secondary Riser Slots 4 and 5 or Tertiary Riser Slot 7 and 8)
  • Supported with power capped at 450W.
  • 1U High Performance Heat Sink (P74787-B21) and Cooling Upgrade Enablement Kit (P81130-B21) must be selected.
  • Qty-1 of HPE ProLiant Double Wide GPU Power Cable Kit (P56072-B21) must be selected which can support up to 3 DW GPUs.
  • Maximum ambient temperature support = 27C (subject to PCIe slot/quantity rules).
  • Available with SFF and EDSFF CTO server model.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: NVIDIA RTX PRO 6000 BLACKWELL SERVER EDITION 96GB PCIE ACCELERATOR FOR HPE

Document row: a00073551enw — page 58
HPE ProLiant Compute DL380 Gen12
“HPE ProLiant Compute DL380 Gen12 QuickSpecs” — a00073551enw · Version 20 — page 58View documentVendor siteSearch this document
NVIDIA RTX PRO 6000 Blackwell Server Edition 96GB PCIe Accelerator for HPE S6A73C

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.