Kimia Shop
FAEN

P48810-B21

Drive cage

HPE ProLiant DL380 Gen11 2SFF U.3 Primary/Secondary Riser Cage Kit

Verified in 1 active model(s): HPE ProLiant DL380 Gen11

Description

Rear drive cage

A rear cage creates extra drive bays at the back of the chassis, usually in place of one of the PCIe risers.

It is used to add boot drives or cache drives without taking front bays.

The chassis's maximum number of drives increases and the front bays stay available for data.

This text is the general explanation of this category of part (not a claim about one specific model).

Attributes (extracted from the official description)

SFF bays
2

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

P48810-B21P48802-B21P48820-B21P52535-B21

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel.

Hover or click a part or a relation to show its recorded rule and official source.

  • Requires: ⁦P48810-B21⁩ requires ⁦P48802-B21⁩. قفسه ⁦2SFF⁩ عقب (⁦Primary/Secondary⁩) نیازمند رایزر ثانویه ⁦x8/x16/x8⁩ (⁦P48802-B21⁩) است. (⁦FA⁩)
  • Requires: ⁦P48810-B21⁩ requires ⁦P48820-B21⁩. قفسه‌های درایو عقب نیازمند کیت فن ⁦Max/High-performance⁩ هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)
  • Requires: ⁦P48810-B21⁩ requires ⁦P52535-B21⁩. قفسه‌های درایو عقب نیازمند کیت فن ⁦Max/High-performance⁩ هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

Active models in which this part is listed

HPE ProLiant DL380 Gen11

step «Drive cages and bays»Maximum quantity: 2Add to this model's configuration

Only with these base models: P52534-B21P52535-B21

Related rules (7)

  • RequirementThis part is the condition of the rule

    قفسه ⁦2SFF⁩ عقب (⁦Primary/Secondary⁩) نیازمند رایزر ثانویه ⁦x8/x16/x8⁩ (⁦P48802-B21⁩) است. (⁦FA⁩)

    Parts on the other side: P48802-B21

    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    If quantity 1 or quantity 2 of 2SFF Primary/Secondary Drive Cage is selected, then HPE ProLiant DL380 Gen11 x8x16x8 secondary riser is required.
  • WarningThe rule applies only when this part is selected

    با یک قفسه ⁦2SFF Primary/Secondary⁩، اسلات‌های ۴ و ۵ رایزر ⁦x8/x16/x8⁩ مسدود می‌شوند. (⁦FA⁩)

    Source: a50004307enw — page 60
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 60View documentVendor siteSearch this document
    If quantity 1 of 2SFF Primary/Secondary Drive Cage is selected, then top two slots (Slot 4 and Slot 5) of HPE ProLiant DL380 Gen11 x8x16x8 Secondary Riser will be blocked by Drive Cage.
  • RequirementThe rule applies only when this part is selected

    2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: S0K90CR9S41C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • RequirementThe rule applies only when this part is selected

    Inferred twin of gpu-dw-2sff-cage-riser-limit for GPUs whose double-wide form factor the document does not state. 2SFF Primary/Secondary cage: a double-wide GPU cannot sit on the x8/x16/x8 Secondary riser (qty 1) nor also on the default Primary riser (qty 2). Required Tertiary risers >= GPUs + cages - 2. Conservative: with 2 cages the optional x16/x16/x16 Primary riser is not counted either (the document names only the default Primary riser).

    Parts on the other side: R8T26CS2D86CS1T66C

    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty2 of 2SFF Primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit and Default Primary Riser.
  • RequirementThe rule applies only when this part is selected

    L40S cannot use the Primary riser; with a 2SFF Primary/Secondary cage (which requires the x8/x16/x8 Secondary riser) a double-wide GPU cannot use the Secondary riser either, so each L40S needs the Tertiary riser.

    Parts on the other side: S2L70C

    Source: a50004307enw — page 65
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 65View documentVendor siteSearch this document
    This GPU cannot be populated on primary Riser.
    Source: a50004307enw — page 64
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 64View documentVendor siteSearch this document
    If Qty1 of 2SFF primary/secondary cage is selected, then Doublewide GPU Cannot be populated on HPE ProLiant DL380 G11 2U x8/x16/x8 Sec Riser Kit.
  • Maximum quantityThe rule limits this part

    8SFF/24SFF chassis: up to 6SFF rear drives (3 rear 2SFF cages); a stacking cage mounted in the front UMB is not counted.

    Source: a50004307enw — page 6
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 6View documentVendor siteSearch this document
    with up to 6SFF rear drive bay options for a total 30 SFF drives
    Source: a50004307enw — page 6
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 6View documentVendor siteSearch this document
    and/or up to 6SFF rear drive bay options
  • RequirementA general rule that covers this part through its attributes

    قفسه‌های درایو عقب نیازمند کیت فن ⁦Max/High-performance⁩ هستند (روی مدل ⁦24SFF⁩ فن‌های ⁦High-performance⁩ همراه پایه است و این الزام را برآورده می‌کند). (⁦FA⁩)

    Parts on the other side: P48820-B21P52535-B21

    Source: a50004307enw — page 31
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 31View documentVendor siteSearch this document
    Maximum Performance fan kit is available to meet ambient temperature environments and are required for rear drives or NVMe configurations.
    Source: a50004307enw — page 62
    HPE ProLiant DL380 Gen11
    “HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 62View documentVendor siteSearch this document
    The 24SFF CTO server will already include 6 High-performance fans.

Official notes (verbatim QuickSpecs text)

  • 2SFF drive cage for rear in Primary or Secondary riser position.
  • This Drive cage can be selected with 8SFF CTO Server and 24SFF CTO Server Only.
  • For 8SFF/ 24SFF CTO Server, Max = 2.

Verification and sources

PartSurfer status: Matches PartSurfer

PartSurfer: HPE PROLIANT DL380 GEN11 2SFF U.3 PRIMARY/SECONDARY RISER CAGE KIT

Document row: a50004307enw — page 49
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 49View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 2SFF U.3 Primary/Secondary Riser Cage Kit P48810-B21
Document row: a50004307enw — page 57
HPE ProLiant DL380 Gen11
“HPE ProLiant DL380 Gen11 QuickSpecs” — a50004307enw · Version 47 — page 57View documentVendor siteSearch this document
HPE ProLiant DL380 Gen11 2SFF U.3 Primary/Secondary Riser Cage Kit P48810-B21

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.