Kimia Shop
FAEN

R1R+R2A+R3A+R4P (FL)

Riser

Dell option (no published part number)

Config No.: 5-2 | Riser configuration: R1R+R2A+R3A+R4P (FL) | No. of Processors: 2 | PERC type supported: Front PERC/PERC Adapter | Rear storage possible: No

Verified in 1 active model(s): Dell PowerEdge R760

Compatibility map

The relations of this part with other parts, from the audited QuickSpecs rules and the compatibility graph only (every line with its official source).

R1R+R2A+R3A+R4P (FL)12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" NVMe Direct12 x 3.5" (SAS/SATA) + 4 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) + 4 x 2.5" (NVMe Direct)12 x 3.5" (SAS/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct)24 x 2.5" (SAS4/SATA) + 2 x 2.5" (NVMe Direct)24 x 2.5"(SAS4/SATA) + 2 x 2.5" (SAS/SATA)24 x 2.5"(SAS4/SATA) + 4 x 2.5" (SAS/SATA)24 x 2.5" (SAS4/SATA) + 4 x 2.5" (NVMe Direct)24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller24 x 2.5" (SAS4/SATA) with 4 x Universal slots (SAS/SATA HWRAID + NVMe Direct) + 4 x 2.5" (SAS4/SATA)24 x 2.5 inches (SAS4/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct)12 x 3.5" (SAS/SATA)24 x 2.5" (SAS4/SATA) - Dual Controller

Click a part or a relation line (or press Enter) to pin its explanation and source; Esc releases it. Drag to pan the map or use the arrow keys; zoom with the buttons, the + and − keys or Ctrl with the mouse wheel. 22 more related part(s) were left off the map for legibility; the rule list on this page is more complete.

Hover or click a part or a relation to show its recorded rule and official source.

  • Incompatible: 12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" (SAS/SATA) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" (SAS/SATA) requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Incompatible: 12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" NVMe Direct and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" NVMe Direct requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Incompatible: 12 x 3.5" (SAS/SATA) + 4 x 2.5" (SAS/SATA) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) + 4 x 2.5" (SAS/SATA) requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Incompatible: 12 x 3.5" (SAS/SATA) + 4 x 2.5" (NVMe Direct) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) + 4 x 2.5" (NVMe Direct) requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Incompatible: 12 x 3.5" (SAS/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct) requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Incompatible: 24 x 2.5" (SAS4/SATA) + 2 x 2.5" (NVMe Direct) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Incompatible: 24 x 2.5"(SAS4/SATA) + 2 x 2.5" (SAS/SATA) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Incompatible: 24 x 2.5"(SAS4/SATA) + 4 x 2.5" (SAS/SATA) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Incompatible: 24 x 2.5" (SAS4/SATA) + 4 x 2.5" (NVMe Direct) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Incompatible: 24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller requires R1R+R2A+R3A+R4P (FL). This dual-controller configuration has an fPERC plus an APERC in Riser 2: only 'Front PERC/PERC Adapter' riser configurations (1-7, 12) are allowed.
  • Incompatible: 24 x 2.5" (SAS4/SATA) with 4 x Universal slots (SAS/SATA HWRAID + NVMe Direct) + 4 x 2.5" (SAS4/SATA) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Incompatible: 24 x 2.5 inches (SAS4/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct) and R1R+R2A+R3A+R4P (FL) are incompatible. Rear storage is possible only with riser configurations 6, 7 and 12.
  • Requires: 12 x 3.5" (SAS/SATA) requires R1R+R2A+R3A+R4P (FL). 12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.
  • Requires: 24 x 2.5" (SAS4/SATA) - Dual Controller requires R1R+R2A+R3A+R4P (FL). This dual-controller configuration has an fPERC plus an APERC in Riser 2: only 'Front PERC/PERC Adapter' riser configurations (1-7, 12) are allowed.

Active models in which this part is listed

Dell PowerEdge R760

step «PCIe riser configuration»Only when ordering CTO (factory)Add to this model's configuration

Related rules (19)

  • RequirementThis part is the condition of the rule

    This riser configuration requires two processors (Table 14).

    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    Table 14. PCIe Riser Configurations Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    0 NO RSR 2 Front PERC No
  • IncompatibilityThis part is one side of an incompatibility

    Rear storage is possible only with riser configurations 6, 7 and 12.

    Parts on the other side: 12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" NVMe Direct12 x 3.5" (SAS/SATA) + 4 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) + 4 x 2.5" (NVMe Direct)12 x 3.5" (SAS/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct)24 x 2.5" (SAS4/SATA) + 2 x 2.5" (NVMe Direct)24 x 2.5"(SAS4/SATA) + 2 x 2.5" (SAS/SATA)24 x 2.5"(SAS4/SATA) + 4 x 2.5" (SAS/SATA)24 x 2.5" (SAS4/SATA) + 4 x 2.5" (NVMe Direct)24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller24 x 2.5" (SAS4/SATA) with 4 x Universal slots (SAS/SATA HWRAID + NVMe Direct) + 4 x 2.5" (SAS4/SATA)24 x 2.5 inches (SAS4/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct)

    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    Table 14. PCIe Riser Configurations Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    6 R2A+R4Q 2 Front PERC/PERC Adapter Yes
  • RequirementThis part can satisfy the requirement of the rule

    12 x 3.5-inch configurations use an adapter PERC in Riser 2: only riser configurations supporting 'PERC Adapter' (1-8, 12) are allowed - not 0, 9, 10 or 11.

    Parts on the other side: 12 x 3.5" (SAS/SATA)12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) w/ rear 2 x 2.5" NVMe Direct12 x 3.5" (SAS/SATA) + 4 x 2.5" (SAS/SATA)12 x 3.5" (SAS/SATA) + 4 x 2.5" (NVMe Direct)12 x 3.5" (SAS/SATA) + 4 x EDSFF E3.S (Gen5 x 4 NVMe Direct)

    Source: dell-r760-ism — page 154
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 154View documentSearch this document
    Table 92. 12 x 3.5-inch SAS/SATA with APERC11/12 in Riser 2
    Source: dell-r760-ism — page 203
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 203View documentSearch this document
    Table 142. 12 x 3.5-inch SAS/SATA + 4 x EDSFF E3.S with APERC11 in Riser 2
  • RequirementThis part can satisfy the requirement of the rule

    This dual-controller configuration has an fPERC plus an APERC in Riser 2: only 'Front PERC/PERC Adapter' riser configurations (1-7, 12) are allowed.

    Parts on the other side: 24 x 2.5" (SAS4/SATA) - Dual Controller24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller

    Source: dell-r760-ism — page 177
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 177View documentSearch this document
    Table 116. 24 x 2.5-inch SAS/SATA dual controller with fPERC (H965i) and APERC in Riser 2
    Source: dell-r760-ism — page 186
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 186View documentSearch this document
    Table 125. 24 x 2.5-inch SAS/SATA dual controller with fPERC (HBA355i, H355, H755) and APERC in Riser 2
  • RequirementThis part can satisfy the requirement of the rule

    Double-width (DW) GPUs are supported only on riser configurations 3-2, 5-2 or 10-2.

    Parts on the other side: A30A40A16A100 80 GBA800H100L40L40S

    Source: dell-r760-ism — page 368
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 368View documentSearch this document
    CAUTION: Double Width (DW) GPU only supported on Riser Configurations 3-2, 5-2, or 10-2.
    Source: dell-r760-ism — page 370
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 370View documentSearch this document
    GPU NVIDIA A30, A40, A16, A100, and A800 FH and FL NVIDIA CPU type 2 x 4 (8-position) 1 each for Riser 1 and Riser 4
  • Maximum quantityThe rule applies only when this part is selected

    Riser configuration 5-2 supports a DW GPU only in slot 7 and 10-2 only in slot 2: at most one DW GPU with these configurations.

    Source: dell-r760-ism — page 368
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 368View documentSearch this document
    NOTE: *The configuration 5-2 supports DW GPU only on slot 7 and configuration 10-2 supports DW GPU only on slot 2.
    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    5-2 R1R+R2A+R3A+R4P (FL) 2 Front PERC/PERC Adapter No
  • Maximum quantityThe rule applies only when this part is selected

    Riser configuration 5-2: these GPUs install only in slot(s) 7; at most 1 in total.

    Source: dell-r760-ism — page 275
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 275View documentSearch this document
    Table 161. Configuration 5-2: R1R+R2A+R3A+R4P (FL)
    Source: dell-r760-ism — page 275
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 275View documentSearch this document
    Card type Slot priority Maximum number of cards
  • Maximum quantityThe rule applies only when this part is selected

    With the selected riser configuration Dell's card tables allow at most 4 GPU(s).

    Source: dell-r760-ism — page 370
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 370View documentSearch this document
    NOTE: A maximum of two DW GPUs with power cables or a maximum of six SW GPUs are supported in a system based on riser configuration.
    Source: dell-r760-ism — page 265
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 265View documentSearch this document
    Intel (GPU ATS-M) 7, 4, 5, 2 4
  • Maximum quantityThe rule applies only when this part is selected

    With the selected riser configuration Dell's card tables allow at most 4 x 540-BDDR.

    Source: dell-r760-ism — page 274
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 274View documentSearch this document
    Intel (NIC: 25Gb) 5, 7, 1, 2 4
    Source: dell-r760-ism — page 277
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 277View documentSearch this document
    Intel (NIC: 25Gb) 5, 7, 1, 2 4
  • Maximum quantityThe rule applies only when this part is selected

    With the selected riser configuration Dell's card tables allow at most 4 x 540-BDIW.

    Source: dell-r760-ism — page 267
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 267View documentSearch this document
    Intel (NIC: 1Gb) 5, 4, 7, 2 4
    Source: dell-r760-ism — page 270
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 270View documentSearch this document
    Intel (NIC: 1Gb) 5, 4, 7, 2 4
  • Maximum quantityThe rule applies only when this part is selected

    With the selected riser configuration Dell's card tables allow at most 6 x HBA355e.

    Source: dell-r760-ism — page 267
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 267View documentSearch this document
    Foxconn (HBA355e DIB External Adapter) 5, 4, 7, 6, 3, 2 6
    Source: dell-r760-ism — page 270
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 270View documentSearch this document
    Foxconn (HBA355e DIB External Adapter) 5, 4, 7, 6, 3, 2 6
  • RequirementThis part can satisfy the requirement of the rule

    GPUs install in riser slots and their maximum depends on the riser configuration: select a riser configuration that supports GPUs.

    Source: dell-r760-ism — page 370
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 370View documentSearch this document
    NOTE: A maximum of two DW GPUs with power cables or a maximum of six SW GPUs are supported in a system based on riser configuration.
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations
  • RequirementThis part can satisfy the requirement of the rule

    External controllers (PERC H965e / HBA355e) install in a riser PCIe slot: select a riser configuration with slots (configuration 0 has none).

    Parts on the other side: PERC H965eHBA355e

    Source: dell-r760-ism — page 262
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 262View documentSearch this document
    Foxconn (H965e DIB External Adapter) 6, 3 1
    Source: dell-r760-ism — page 260
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 260View documentSearch this document
    Table 154. Configuration 0: No risers
  • RequirementThis part can satisfy the requirement of the rule

    PCIe NICs (540-BDIW / 540-BDDR, full height) install in a riser PCIe slot: select a riser configuration with slots (configuration 0 has none).

    Parts on the other side: 540-BDDR540-BDIW

    Source: dell-r760-tg — page 92
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 92View documentSearch this document
    Intel Ethernet i350 Quad Port 1 GbE BASE-T Adapter, PCIe Full Height, V2, FIRMWARE RESTRICTIONS APPLY [540-BDIW]
    Source: dell-r760-tg — page 92
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 92View documentSearch this document
    Intel E810-XXVDA4 Quad Port 10/25GbE SFP28 Adapter, PCIe Full Height [540-BDDR]
  • Maximum quantityThe rule applies only when this part is selected

    The selected riser configuration (3-1, 3-2, 4-1, 5-1, 5-2, 7/12) has 6 PCIe slot(s) (ISM Table 153): GPUs + PCIe NICs + external controllers <= 6.

    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Configurations Expansion card risers PCIe Slots Form factor Controlling processor
  • Maximum quantityThe rule applies only when this part is selected

    12 x 3.5-inch bases use a PERC Adapter in Riser 2 (one slot): with riser configuration 3-1, 3-2, 4-1, 5-1, 5-2, 7/12 slot cards + adapter <= 6.

    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Configurations Expansion card risers PCIe Slots Form factor Controlling processor
  • Maximum quantityThe rule applies only when this part is selected

    Front + adapter dual-controller base: with riser configuration 3-1, 3-2, 4-1, 5-1, 5-2, 7/12 slot cards + internal controllers <= 7 (6 slots + the front PERC's integrated slot).

    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Configurations Expansion card risers PCIe Slots Form factor Controlling processor
  • Maximum quantityThe rule applies only when this part is selected

    The selected riser configuration (3-1, 3-2, 4-1, 5-1, 5-2, 7/12) has 4 full-height slot(s) (Table 153): GPUs + full-height PCIe NICs <= 4.

    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Configurations Expansion card risers PCIe Slots Form factor Controlling processor
  • RequirementA general rule that covers this part through its attributes

    The allowed number and position of storage controllers (front PERC / PERC Adapter) depend on the riser configuration: select it (or configuration 0 'NO RSR').

    Parts on the other side: PERC H965iPERC H755PERC H755NPERC H355HBA355iHBA465i

    Source: dell-r760-tg — page 34
    Dell PowerEdge R760 Technical Guide
    “dell-r760-tg” — page 34View documentSearch this document
    Table 14. PCIe Riser Configurations Config No. Riser configuration No. of Processors PERC type supported Rear storage possible
    Source: dell-r760-ism — page 256
    Dell PowerEdge R760 Installation and Service Manual
    “dell-r760-ism” — page 256View documentSearch this document
    Table 153. Expansion card riser configurations

Verification and sources

Verified against this option's row in Dell's official documents; Dell publishes no part number for it - the orderable SKU and price come from a Dell quote.

Document row: dell-r760-tg — page 34
Dell PowerEdge R760 Technical Guide
“dell-r760-tg” — page 34View documentSearch this document
5-2 R1R+R2A+R3A+R4P (FL) 2 Front PERC/PERC Adapter No

This page contains only the audited data of the official vendor documents (HPE, Lenovo, Dell) for the active models. Price and availability are given through the quote request in the configurator.